User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-4 Chapter 1: Product introduction
1.3.2 Back view
1
2
3
4 5 6 7 8 9
10 10
10
1. Kensington lock slot.
2. Power switch. Press the switch to turn on/off power.
3. AC-IN port. This port connects the power cord.
4. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
5. HDMI-1 port. This port is for connection with an HDMI compatible
device.
6. HDMI-2 port. This port is for connection with an HDMI compatible
device.
7. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
8. USB 2.0 Type A. This port is for service only.
9. USB 3.2 Gen1 Type B. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
10. USB 3.2 Gen1 Type A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.