User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.1.2 OSD function introduction
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-5ASUS PA248CRV Series LCD Monitor
1.3.3 Other Function(s)
1. Daisy chaining (for selected models)
The monitor supports daisy chain on DisplayPort and USB Type-C. Daisy Chaining
allows up to 4 monitors to be connected in series with the video signal being
passed from the source to a monitor (when the input source is 1920 x 1200@60Hz
and no USB-C device is connected). In order to enable daisy chaining, please
make sure the source transported.
To activate this function, you need to do the following: When MST or SST mode
is On, turn off HDR mode.
This function is only available when Power Saving is Normal Level. If you
set Power Saving to Deep Level, all the connected monitors will display the
same content at the same time (clone). Note: Input port will be xed (no auto
detection) when DP out cable is plugged.
96W
ＨＤＭＩ－１
ＨＤＭＩ－２
96W
ＨＤＭＩ－１
ＨＤＭＩ－２
96W
1920 x 1200 @60Hz
1920 x 1200 @60Hz
96W