User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 Installing the CPU and heatsink
- 2.1.2 DIMM installation
- 2.1.3 M.2 installation
- 2.1.4 Additional cooling kit installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 SlimSAS connection
- 2.1.9 Front I/O connector
- 2.1.10 Expansion card installation
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS Support
- Appendix
1-22
Chapter 1: Product Introduction
Chapter 1
27. SMART PSU switch
This switch allows you to select PSU PMBus version.
26. Safe Boot button
The Safe Boot button temporarily applies safe settings to the BIOS while retaining the
overclocked settings, allowing you to modify the settings causing a boot failure. Press
this button at anytime to force the system to reboot into the BIOS safe mode.