User’s Manual

3-54
Chapter 3: Web-based User Interface
Password Size
Select the preferred size for the password.
This item is only configurable if
Change
password
is enabled or when adding a new
user.
Password
The password field is mandatory and should have a
minimum of 8 characters.
This item is only configurable if
Change
password
is enabled or when adding a new
user.
Confirm Password
Confirm the password by entering it again in this field.
This item is only configurable if
Change
password
is enabled or when adding a new
user.
Enable User Access
Enable or disable User Access.
Enable
Channel
Access
Channel 1
Check the boxes to enable network access for the user.
Upon enabling, the corresponding IPMI messaging
privilege will be assigned to the user.
It is recommended that the IPMI messaging
option should be enabled as well if user is
created through IPMI.
Channel 2
Privilege (Channel 1)
Select the privilege level for each channel to be
assigned to this user for access to the BMC through
the network interface. There are 5 levels of Network
Privileges (Administrator, Operator, User, OEM, and
None).
These items are only configurable if
Channel 1
or
Channel 2
under
Enable Channel Access
is
enabled.
Privilege (Channel 2)
SNMP Access
Enable or disable SNMP access for the user.
SMNP Access Level
Select the SNMP Access level option for this new user.
This item is only configurable if
SNMP Access
is
enabled.
SMNP Authentication Protocol
Select an SNMP Authentication Protocol for this user.
This item is only configurable if
SNMP Access
is
enabled.
(continued on the next page)