User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-29
Media Type
Displays the media type of the active redirection.
Media Instance
Displays the media instance of the active redirection.
Client Type
Displays the remote machine type of the active
redirection.
Image Name
Displays the media name of the active redirection.
Redirection Status
Displays the redirection status of the active redirection.
Client IP
Displays the remote machine’s IP of the active
redirection.
Active Redirections
This page displays the list of media currently being redirected, and also displays the status
and other basic information of each media item.
Network IP Settings
This page allows you to manage LAN support for the interface.
3.7.7 Network Settings
The Network Settings page allows you to configure the network settings.
Enable LAN
Enable or disable LAN support for the interface shown.
LAN Interface
Select the LAN interface to be configured.
MAC Address
Displays the MAC address of the selected interface and
is read only.
Enable IPv4
Enable or disable IPv4 support for the selected interface.
Enable IPv4 DHCP
Enable this option to dynamically configure IPv4 address
using Dynamic Host Configuration Protocol (DHCP).
IPv4 Address
Specify a static IPv4 address for the selected interface.
• This item is only configurable if
Enable IPv4
DHCP
is disabled.
• Consists of 4 sets of numbers separated by
dots as in ‘
xxx.xxx.xxx.xxx
’.
• Each set ranges from 0 to 255.
• First number cannot be 0.
(continued on the next page)