User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
3-10
Chapter 3: Web-based User Interface
3.5 FRU Information
This Page displays the BMC’s FRU (Field Replaceable Units) device information. The
FRU page shows Basic Information, Chassis Information, Board Information and Product
Information of the FRU device. Scroll down to view more items.
To view the information on an FRU device:
1. Select an FRU Device ID from the FRU Device ID drop down menu.
2. The FRU device name and information on the FRU device selected will be displayed
once your selection has been made.
Writing FRU information using IPMITool
You can write the FRU information by entering commands through the IPMITool. To write the
FRU information using IPMITool:
1. Unlock the FRU by entering the command in IPMITool.
2. After unlocking the FRU, write the information from the modified .bin file to the FRU
using the command in IPMITool.
3. Entering the print command will display the newly written FRU information.
For a list of IPMITool commands, please refer to the
Appendix
.