User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 Redfish Host Interface Settings
- 7.3 UEFI Variables Protection
- 7.4 Serial Port Console Redirection
- 7.5 System Storage Configuration for VROC
- 7.6 PCI Subsystem Settings
- 7.7 USB Configuration
- 7.8 Network Stack Configuration
- 7.9 NVMe Configuration
- 7.10 HDD/SSD SMART Information
- 7.11 CPU Configuration
- 7.12 APM Configuration
- 7.13 Onboard Devices Configuration
- 7.14 All Cpu Information
- 7.15 Intel(R) Virtual RAID on CPU
- 7.16 Intel(R) VROC SATA Controller
- 8. Platform Configuration menu
- 9. Socket Configuration menu
- 10. Monitor menu
- 11. Boot menu
- 12. Tool menu
- 13. Server Mgmt menu
- 14. Exit menu
74
Intel W790 Series BIOS Manual
Voltage Monitor
CPU Core Voltage, 12V Voltage, 5V Voltage, 3.3V Voltage, VCCD HV 1.14V In /
MC Voltage [x.xxx V]
The onboard hardware monitor automatically detects the voltage output through the
onboard voltage regulators. Select [Ignore] if you do not want to detect this item.
Q-Fan Configuration
For BMC models (such as Pro WS W790E-SAGE SE), Q-Fan Configuration will only
appear when the BMC_SW is set to disabled. For more information on the location of the
BMC_SW, please refer to the motherboard’s user guide.
Q-Fan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
The process may take 2 to 5 minutes. DO NOT shut down or reset your system during the
tuning process.
CPU Q-Fan Control
Allows you to set the CPU Q-Fan operating mode.
[Auto Detect] Detects the type of installed fan/pump and automatically switches
the control modes.
[DC Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/pump.
[PWM Mode] Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
CPU Fan Profile
Allows you to set the appropriate performance level of the assigned fan/pump. When
selecting [Manual], we suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]