User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 Installing the CPU and heatsink
- 2.1.2 DIMM installation
- 2.1.3 M.2 installation
- 2.1.4 Additional cooling kit installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 SlimSAS connection
- 2.1.9 Front I/O connector
- 2.1.10 Expansion card installation
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS Support
- Appendix
2-12
Chapter 2: Basic Installation
Chapter 2
4. Remove the plastic film from the thermal pads on the bottom of the heatsinks.
If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it
with a thermal pad with a thickness of 1.25mm.
5. Replace the heatsinks.
6. Secure the heatsinks using the screws on the heatsink.
6
6
6
66
5
5
5
4