User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 Installing the CPU and heatsink
- 2.1.2 DIMM installation
- 2.1.3 M.2 installation
- 2.1.4 Additional cooling kit installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 SlimSAS connection
- 2.1.9 Front I/O connector
- 2.1.10 Expansion card installation
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS Support
- Appendix
Pro WS W790E-SAGE SE
1-17
Chapter 1
16. Fixed Dedicated BMC LAN IP switch
The Fixed Dedicated BMC LAN IP switch allows you to set a fixed IP (10.10.10.10)
when set to enabled.
17. FlexKey button (Reset)
Press the FlexKey button to reboot the system. You may also configure the button and
assign a quick access feature such as activating Safe Boot to the button.
This button set to [Reset] by default. You can assign a different function to this button in
the BIOS settings.