User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 Redfish Host Interface Settings
- 7.3 UEFI Variables Protection
- 7.4 Serial Port Console Redirection
- 7.5 System Storage Configuration for VROC
- 7.6 PCI Subsystem Settings
- 7.7 USB Configuration
- 7.8 Network Stack Configuration
- 7.9 NVMe Configuration
- 7.10 HDD/SSD SMART Information
- 7.11 CPU Configuration
- 7.12 APM Configuration
- 7.13 Onboard Devices Configuration
- 7.14 PCIe Redriver Tuning
- 7.15 All Cpu Information
- 7.16 Intel(R) Virtual RAID on CPU
- 7.17 Intel(R) VROC SATA Controller
- 8. Platform Configuration menu
- 9. Socket Configuration menu
- 10. Monitor menu
- 11. Boot menu
- 12. Tool menu
- 13. Server Mgmt menu
- 14. Exit menu
98
Intel W790 Series BIOS Manual
14. Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Save Changes
Save changes done so far to any of the setup options.
Discard Changes
Discard changes done so far to any of the setup options.
Load Optimized Defaults
Restores/loads the default values for all the setup options. When you select this option or if
you press <F5>, a confirmation window appears. Select OK to load the default values.
Save Changes & Reset
Resets the system after saving the changes made. When you select this option or if you
press <F10>, a confirmation window appears. Select OK to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press <Esc>, a confirmation window appears. Select Yes to
discard changes and exit.
Launch EFI Shell from USB drives
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one
of the available filesystem devices.