User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 Redfish Host Interface Settings
- 7.3 UEFI Variables Protection
- 7.4 Serial Port Console Redirection
- 7.5 System Storage Configuration for VROC
- 7.6 PCI Subsystem Settings
- 7.7 USB Configuration
- 7.8 Network Stack Configuration
- 7.9 NVMe Configuration
- 7.10 HDD/SSD SMART Information
- 7.11 CPU Configuration
- 7.12 APM Configuration
- 7.13 Onboard Devices Configuration
- 7.14 PCIe Redriver Tuning
- 7.15 All Cpu Information
- 7.16 Intel(R) Virtual RAID on CPU
- 7.17 Intel(R) VROC SATA Controller
- 8. Platform Configuration menu
- 9. Socket Configuration menu
- 10. Monitor menu
- 11. Boot menu
- 12. Tool menu
- 13. Server Mgmt menu
- 14. Exit menu
42
Intel W790 Series BIOS Manual
SPD HUB VLDO (1.8V)
Main power for the SPD Hub Logic. Default is 1.8V. Use the <+> and <-> keys to
adjust the value. The values range from 1.700V to 2.000V with an interval of 0.100V.
Configuration options: [Auto] [1.70000] - [2.00000]
SPD HUB VDDIO (1.0V)
Power for the SPD Hub side-band interface. Default is 1.0V. Use the <+> and <->
keys to adjust the value. The values range from 0.900V to 1.200V with an interval of
0.100V.
Configuration options: [Auto] [0.90000] - [1.20000]
DRAM Voltage Switching Frequency
Switching Frequency of DRAM Voltage Regulator in MHz. Use the <+> and <-> keys
to adjust the value. The values range from 0.500MHz to 1.250MHz with an interval of
0.250MHz.
Configuration options: [Auto] [0.50000] - [1.25000]
DRAM Current Capability
Current Capability for the Switching Regulators in Amps. Use the <+> and <-> keys to
adjust the value. The values range from 0.125A to 7.875A with an interval of 0.125A.
Configuration options: [Auto] [0.12500] - [7.87500]