User’s Manual

PRIME Z790-V WIFI
1-19
Chapter 1
18. System Panel header
The System Panel header supports several chassis-mounted functions.
+
PWR_LED
-
+
PWR_LED-
SPEAKER
+
HDD_LED-
PWR_SW
RESET
PIN 1
PLED
+
PLED
-
PWRBTN# GND +5V Ground Ground Speaker
HDD_LED
+
HDD_LED
-
Ground
RSTCON#
NC
PLED
+
PLED
-
PANEL
• System Power LED header (+PWR_LED-)
The 2-pin and/or 3-1 pin headers allow you to connect the System Power LED. The
System Power LED lights up when the system is connected to a power source, or
when you turn on the system power, and blinks when the system is in sleep mode.
• Storage Device Activity LED header (+HDD_LED-)
The 2-pin header allows you to connect the Storage Device Activity LED. The Storage
Device Activity LED lights up or blinks when data is read from or written to the storage
device or storage device add-on card.
• System Warning Speaker header (SPEAKER)
The 4-pin header allows you to connect the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
• Power Button/Soft-off Button header (PWRSW)
The 3-1 pin header allows you to connect the system power button. Press the
power button to power up the system, or put the system into sleep or soft-off mode
(depending on the operating system settings).
• Reset button header (RESET)
The 2-pin header allows you to connect the chassis-mounted reset button. Press the
reset button to reboot the system.