User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
64
PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
6.8 Trusted Computing
The items in this menu allow you to configure the Trusted Computing settings.
The availability of this menu, as well as the settings and options may vary depending on
your motherboard. Please refer to the BIOS of your motherboard for the actual settings
and options.
Security Device Support
Allows you to enable or disable the BIOS support for security device. O.S. will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
Configuration options: [Disable] [Enable]
The following items appear only when Security Device Support is set to [Enable].
SHA256 PCR Bank
Allows you to enable or disable the SHA256 PCR Bank.
Configuration options: [Disabled] [Enabled]
Pending operation
Allows you to schedule an Operation for the Security Device.
Configuration options: [None] [TPM Clear]
Your computer will reboot during restart in order to change the State of the Security
Device.
Platform Hierarchy
Allows you to enable or disable the Platform Hierarchy.
Configuration options: [Disabled] [Enabled]
Storage Hierarchy
Allows you to enable or disable the Storage Hierarchy.
Configuration options: [Disabled] [Enabled]