User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
22
PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
The following items appear only when Performance Core Ratio is set to [By Core
Usage].
1-Core Ratio Limit / 2-Core Ratio Limit / 3-Core Ratio Limit / 4-Core Ratio
Limit / 5-Core Ratio Limit / 6-Core Ratio Limit
The N-core ratio limit must be higher than or equal to the (N+1)-core ratio limit. (N stands for
the number of CPU cores) The core ratio limit cannot be set to [Auto] when the core number
is lower than N. The biggest core’s ratio limit must be lower than or equal to the second
biggest core’s ratio limit. Use the <+> or <-> to adjust the value.
Configuration options: [Auto] [36] - [85]
The following item appears only when Performance Core Ratio is set to [AI Optimized].
Optimized AVX Frequency
Select [Normal Use] for typical use cases, or select [Heavy AVX] for extreme loads such as
Prime 95 AVX.
Configuration options: [Normal Use] [Heavy AVX]
The following items appear only when Performance Core Ratio is set to [Auto], [Sync
All Cores] or [By Core Usage].
Specific Performance Core
Performance Core0-5 Specific Ratio Limit
Configure a ratio limit for certain Performance Cores. Use the <+> or <-> to adjust the
value.
Configuration options: [Auto] [8] - [85]
Performance Core0-5 specific Voltage
Allows configuration of the voltage supply to the CPU cores. Setting to
[Auto] will
scale voltage according to the applied CPU core ratio. Do not confuse this setting with
VCCIN (CPU Input voltage).
Configuration options: [Auto] [Manual Mode] [Adaptive Mode]
The following item appears only when Performance Core0-5 specific Voltage is set to
[Manual Mode].
CPU Core-0 Voltage Override / CPU Core-1 Voltage Override / CPU Core-2
Voltage Override / CPU Core-3 Voltage Override / CPU Core-4 Voltage Override /
CPU Core-5 Voltage Override
Allows configuration of the CPU core voltage. Use the <+> or <-> to adjust the value.
The values range from 0.600V to 1.700V with an interval of 0.001V.
Configuration options: [Auto] [0.00600] - [1.70000]
You need to save the changes and reset the system for the changes to take effect.