User Manual

42
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
Serial Port
Allows you to enable or disable serial port. Conguration options: [On] [Off]
The following item appears only when you set Serial Port to [On].
Change Settings
Allows you to select an optimal settings for Super IO device.
Conguration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
7.13 APM Configuration
The items in this menu allow you to adjust the Advanced Power Management (APM) settings.
Restore AC Power Loss
Allows you to select the AC power state when power is re-applied after a power failure.
Conguration options: [Power On] [Power Off] [Last State]
CEC Ready
When this item is set to [Enabled], the system will comply with CEC (California Energy
Commission) regulations and save more power under S0 state.
Conguration options: [Disabled] [Enabled]
Energy Star Ready
Conguration options: [Disabled] [Enabled]
ErP Ready
Allows you to switch off some power at S4/S5 to get the system ready for ErP requirement.
When this item is set to [Enabled], all other PME options will be switched off. RGB LEDs and
RGB/Addressable RGB headers will also be disabled.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
Power On By PS/2 Keyboard
Allows you to enable or disable power-on by your PS/2 keyboard, or to select a way to switch
the power on using your PS/2 keyboard.
Conguration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]