User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
39
7.10 Network Stack Configuration
The items in this menu allow you to enable or disable the UEFI network stack.
Network Stack
Allows you to enable or disable the UEFI network stack.
Conguration options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
IPv4 PXE Support
Allows you to enable or disable the IPv4 PXE Boot Support. If this item is set to
[Disabled], IPv4 PXE boot option will not be created.
Conguration options: [Disabled] [Enabled]
IPv6 PXE Support
Allows you to enable or disable the IPv6 PXE Boot Support. If this item is set to
[Disabled], IPv6 PXE boot option will not be created.
Conguration options: [Disabled] [Enabled]
7.11 NVMe Configuration
This menu displays the NVMe controller and drive information of the connected devices. The
screen shows No NVME Device Found if no NVME device is detected.