User Manual

SATA6G_1~4(Gray)
SATA6G_1~4(Gray) [Enabled]
Allow you to enable/disable the SATA6G_1~4 port. Conguration options: [Disabled]
[Enabled]
SATA6G_1~4 Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Conguration
options: [Disabled] [Enabled]
2.6.6 PCH-FW Configuration
Intel Platform Trust Technology [Disabled]
This item allows you to enable or disable the Intel Platform Trust Technology (PTT).
Conguration options: [Enabled] [Disabled]
2.6.7 Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-denition audio depending on the audio standard that the front panel audio
module supports.
[HD] Sets the front panel audio connector (AAFP) mode to high denition
audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF] Sets to an SPDIF audio output.
[HDMI] Sets to an HDMI audio output.
DVI Port Audio [Disabled]
Allows you to enable or disable DVI port audio. Conguration options: [Enabled]
[Disabled]
LED Lighting [Breathing Mode]
This item allows you to set the audio shielding LED mode. Conguration options: [Disabled]
[Still Mode] [Breathing Mode]
M.2_1/2 Mode Configuration [Auto]
M.2_1/2 shares SATA mode with SATA6G_1/SATA6G_2.
[Auto] Auto detects the M.2 device mode. If a M.2 device is detected, SATA6G_1
/2 will be disabled.
[SATA] Only supports M.2 SATA devices. SATA6G_1/2 cannot be used in this
mode.
[PCIE] Only supports M.2 PCIE devices.
2-34 Chapter 2: Getting started