User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 Motherboard installation
- 2.1.4 DIMM installation
- 2.1.5 ATX power connection
- 2.1.6 SATA device connection
- 2.1.7 Front I/O connector
- 2.1.8 Expansion card installation
- 2.1.9 M.2 installation
- 2.1.10 Fan bracket installation
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS Setup
- 3.1 Knowing BIOS
- 3.2 BIOS setup program
- 3.3 My Favorites
- 3.4 Main menu
- 3.5 Ai Tweaker menu
- 3.6 Advanced menu
- 3.6.1 AMD fTPM configuration
- 3.6.2 CPU Configuration
- 3.6.3 PCI Subsystem Settings
- 3.6.4 USB Configuration
- 3.6.5 HDD/SSD SMART Information
- 3.6.6 NVMe Configuration
- 3.6.7 SATA Configuration
- 3.6.8 Onboard Devices Configuration
- 3.6.9 APM Configuration
- 3.6.10 Network Stack Configuration
- 3.6.11 AMD CBS
- 3.6.12 AMD PBS
- 3.6.13 AMD Overclocking
- 3.7 Monitor menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Exit menu
- 3.11 Updating BIOS
- Chapter 4: RAID Support
- Appendix
3-16
Chapter 3: BIOS Setup
Chapter 3
PCIEX16_1 Bandwidth
[X16 Mode] The PCIe x16_1 slot runs at x16 mode.
[PCIe RAID Mode] The four PCIe x16 slots run at x4+x4+x4+x4 mode, which allows
you to create a RAID array for up to 4 PCIe devices.
Use PCIe RAID Mode when installing the Hyper M.2 x16 card or other M.2 adapter cards.
Installing other devices when using PCIe RAID Mode may cause your PC to fail to boot
up.
PCIEX16_2 Bandwidth
[X8 Mode] The PCIe x16_2 slot runs at x8 mode.
[PCIe RAID Mode] The PCIe x16 slots run at x4+x4 mode, which allows you to
create a RAID array for up to 2 PCIe devices.
Use PCIe RAID Mode when installing the Hyper M.2 x16 card or other M.2 adapter cards.
Installing other devices when using PCIe RAID Mode may cause your PC to fail to boot
up.
PCIEX16_3 Bandwidth
[X16 Mode] The PCIe x16_3 slot runs at x16 mode.
[PCIe RAID Mode] The four PCIe x16 slots run at x4+x4+x4+x4 mode, which allows
you to create a RAID array for up to 4 PCIe devices.
Use PCIe RAID Mode when installing the Hyper M.2 x16 card or other M.2 adapter cards.
Installing other devices when using PCIe RAID Mode may cause your PC to fail to boot
up.
HD Audio Controller
This item allows you to use the Azalia High Denition Audio Controller.
Conguration options: [Disabled] [Enabled]
ASM1074 Controller (Back)
[Disabled] Disables the controller.
[Enabled] Enables the rear USB 3.2 controller.
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Conguration options: [On] [Off]
Q-Code LED Function
[Disabled] Disable the Q-Code LED function.
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
[Auto] Automatically display POST (Power-On Self-Test) code and
CPU temperature on Q-Code LED.