User Manual
Table Of Contents
- 1. Kennenlernen des BIOS
- 2. BIOS-Setup-Programm
- 3. Favoriten
- 4. Hauptmenü
- 5. Ai Tweaker-Menü
- 6. Advanced-Menü
- 6.1 Weitere Plattformkonfiguration
- 6.2 CPU-Konfiguration
- 6.3 System Agent (SA) Configuration (Systemagent- (SA-) Konfiguration)
- 6.4 PCH-Konfiguration
- 6.5 PCH Speicherkonfiguration
- 6.6 PCH-FW Konfiguration
- 6.7 Thunderbolt(TM) Konfiguration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Einstellungen
- 6.10 USB-Konfiguration
- 6.11 Netzwerkstapelkonfiguration
- 6.12 NVMe-Konfiguration
- 6.13 SMART-Informationen zu Festplatte/SSD
- 6.14 APM-Konfiguration
- 6.15 Onboard-Gerätekonfiguration
- 6.16 Intel(R) Rapid Storage-Technologie
- 7. Überwachungsmenü
- 8. Boot Menü
- 9. Tools-Menü
- 10. Exit-Menü
- 11. Aktualisieren des BIOS
26
BIOS-Handbuch für PRIME / ProArt / TUF GAMING Intel 700 Serie
DRAM RAS# ACT Zeit
Konfigurationsoptionen: [Auto] [1] – [511]
DRAM Command Rate
Konfigurationsoptionen: [Auto] [1N] [2N] [3N] [N:1]
Das folgende Element wird nur angezeigt, wenn DRAM Command Rate (DRAM Befehlsrate) auf
[N:1] gesetzt ist.
Verhältnis N zu 1
Anzahl der Niveaus zwischen den einzelnen gültigen Befehlszyklen. Konfigurationen: [1] - [7]
Sekundäre Taktwerte
DRAM RAS# to RAS# Delay L
Konfigurationsoptionen: [Auto] [1] – [63]
DRAM RAS# to RAS# Delay S
Konfigurationsoptionen: [Auto] [1] – [127]
DRAM REF Zykluszeit (tRFC)
Konfigurationsoptionen: [Auto] [1] - [65535]
DRAM REF Zykluszeit 2
Konfigurationsoptionen: [Auto] [1] - [65535]
DRAM REF Zykluszeit für selbe Speicherbank
Konfigurationsoptionen: [Auto] [0] - [2047]
DRAM Aktualisierungsintervall
Konfigurationsoptionen: [Auto] [1] - [262143]
DRAM WRITE Recovery Time (tWR)
Konfigurationsoptionen: [Auto] [1] - [234]
DRAM READ zu PRE Zeit
Konfigurationsoptionen: [Auto] [1] – [255]
DRAM FOUR ACT WIN Zeit
Konfigurationsoptionen: [Auto] [1] - [511]
DRAM WRITE zu READ Verzögerung
Konfigurationsoptionen: [Auto] [1] – [31]
DRAM WRITE to READ Delay L
Konfigurationsoptionen: [Auto] [1] – [31]
DRAM WRITE to READ Delay S
Konfigurationsoptionen: [Auto] [1] – [31]
DRAM CKE Minimum Pulsbreite
Konfigurationsoptionen: [Auto] [0] – [127]
DRAM-Schreiblatenz
Konfigurationsoptionen: [Auto] [1] – [255]