User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
33
7.4 PCH Configuration
The items in this menu allow you to set the PCH parameters.
PCI Express Configuration
Allows you to congure the PCI Express Conguration settings.
PCIe Speed
Allows you to set the PCIe speed. Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
7.5 PCH Storage Configuration
The items in this menu show the PCH Storage Conguration options. While entering Setup,
the BIOS automatically detects the presence of SATA devices. The SATA Port items show
Empty if no SATA device is installed to the corresponding SATA port.
SATA Controller(s)
This item allows you to enable or disable the SATA device.
Conguration options: [Enabled] [Disabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Determines how SATA controller(s) operate. Conguration options: [AHCI]
Aggressive LPM Support
Allows you to enable or disable PCH to aggressively enter link power state.
Conguration options: [Disabled] [Enabled]