User's Manual

Cache Vault Accessory Kit

4. Install the PIKE 2208 card installed

with the Cache Vault Flash Module

on the system. Connect the cable

from the Cache Vault Power Module

to the Cache Vault Flash Module.

5. Secure the cable to the bottom

chassis cover using a piece of

acetate cloth tape.

Installing the kit on RS920-E7/RS8, RS926-E7/RS8 server systems

1. Take out the riser card bracket from

the system and place it on a at, stable

surface. Locate the three screws.

For more details on how to uninstall the riser card bracket, refer to the user

manual that came with your server system.

2. Align the two screws on the side

of the steel CVPM holder installed

with the Cache Vault Power Module

to the screw holes of the full-height

steel bracket. Secure the holder

assembly with the bundled screws

(3).

3. Place the holder assembly into the

system and secure it with the screw

removed earlier in step 1.