User’s Manual
Table Of Contents
- Inhalt
- Kapitel 1: Produkteinführung
- Kapitel 2: Hardware-Beschreibungen
- Kapitel 3: BIOS-Setup
- 3.1 Verwalten und Aktualisieren des BIOS
- 3.2 BIOS-Setupprogramm
- 3.3 Main-Menü
- 3.4 Ai Tweaker-Menü
- 3.4.1 Ai Overclock Tuner [Auto]
- 3.4.2 CPU Ratio Setting [Auto]
- 3.4.3 FSB Strap to North Bridge [Auto]
- 3.4.4 DRAM Frequency [Auto]
- 3.4.5 DRAM CLK Skew on Channel A1/A2/B1/B2 [Auto]
- 3.4.6 DRAM Timing Control [Auto]
- 3.4.7 DRAM Static Read Control [Auto]
- 3.4.8 DRAM Read Training [Auto]
- 3.4.9 MEM. OC Charger
- 3.4.10 Ai Clock Twister [Auto]
- 3.4.11 Ai Transaction Booster [Auto]
- 3.4.12 CPU Voltage [Auto]
- 3.4.13 CPU GTL Voltage Reference(0/2) [Auto]
- 3.4.14 CPU GTL Voltage Reference(1/3) [Auto]
- 3.4.15 CPU PLL Voltage [Auto]
- 3.4.16 FSB Termination Voltage [Auto]
- 3.4.17 DRAM Voltage [Auto]
- 3.4.18 NB Voltage [Auto]
- 3.4.19 NB GTL Voltage Reference [Auto]
- 3.4.20 SB Voltage [Auto]
- 3.4.21 PCIE SATA Voltage [Auto]
- 3.4.22 Load-Line Calibration [Auto]
- 3.4.23 CPU Spread Spectrum [Auto]
- 3.4.24 PCIE Spread Spectrum [Auto]
- 3.4.25 CPU Clock Skew [Auto]
- 3.4.26 NB Clock Skew [Auto]
- 3.4.27 CPU Margin Enhancement [Optimized]
- 3.5 Advanced-Menü
- 3.6 Power-Menü
- 3.7 Boot-Menü
- 3.8 Tools-Menü
- 3.9 Exit-Menü
- Kapitel 4: Software- Unterstützung
- Anhang: CPU-Eigenschaften
3-18 Kapitel 3: BIOS-Setup
2nd Information: 8-3-5-4-6-4-6
Die Werte hängen von der Einstellung der folgenden Unterelemente ab:
Write to Read Delay(S) [Auto]
WRITE to READ Delay(D) [Auto]
READ To READ Delay(S) [Auto]
READ To READ Delay(D) [Auto]
WRITE To WRITE Delay(S) [Auto]
WRITE To WRITE Delay(D) [Auto]
3rd Information: 13-5-1-5-513-5-1-5-5
Die Werte hängen von der Einstellung der folgenden Unterelemente ab:
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]
3.4.7 DRAM Static Read Control [Auto]
Die Einstellung dieses Elements verbessert die DRAM-Übertaktung.