User’s Manual
Table Of Contents
- 目 錄 內 容
- 第一章:產品介紹
- 第二章:BIOS
- 程式設定
- 第三章:軟體支援
- 附錄:CPU 特殊功能
華碩 P5KPL-AM 主機板使用手冊
2-23
北橋設定(North Bridge Configuration)
Memory Remap Feature [Enabled]
本項目用來開啟或關閉記憶體位址重映射功能。當您安裝了 4G 記憶體時,
我們建議您將本項目設為 [Enabled]。設定值有:[Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
本項目通過讀取記憶體的 SPD(Serial Presence Detect)晶片的內容來設
定最佳化的速度控制。設定值有:[Enabled] [Disabled]
NorthBridgechipsetConguration
Memory Remap Feature [Disabled]
CongureDRAMTimingbySPD [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
PEGPortConguration
PEG Force x 1 [Disabled]
VideoFunctionConguration
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
Initiate Graphic Adapter [PEG/PCI]
本項目用來設定作為優先使用的繪圖顯示控制器。設定值有:[IGD] [PCI/
IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
本項目允許您選擇內建顯示裝置所使用的系統記憶體大小。設定值有:
[Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Force x1 [Disabled]
本項目用來開啟或關閉 PEG Forec x 1。設定值有:
[Enabled] [Disabled]
2.4.4 晶片設定(Chipset)
本選單 可 讓您變更晶 片 組的進階設 定 ,請選擇所 需 的項目並按一 下
<Enter> 鍵以顯示次選單項目。
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
NorthBridgeConguration
SouthBridgeConguration
CongureNorthBridge
features.