Owner's manual
1-28 Chapter 1: Product Introduction
1.10.2 Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided oppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the oppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
P5KPL/1600
P5KPL/1600
Floppy Disk Drive Connector
NOTE:
Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN1
FLOPPY
2. Optical drive audio in connector (4-pin CD)
This connector allows you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
P5KPL/1600
P5KPL/1600 Internal Audio Connector
CD
(black)
Righ
t A
udio Channel
Lef
t
A
udio Channel
Gr
o
und
Gr
o
und