User’s Manual

華碩P5KPL/1600主機板使用手冊 2-33
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
Speciestheboot
sequencefromthe
available devices.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
 BootSettingsConguration
Security
SpeciestheBoot
Device Priority
sequence.
Avirtualoppydisk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
rstbootdevice.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Boot Device Priority
Boot Settings
VCORE Voltage，3.3V Voltage，5V Voltage，12V Voltage
[xxxV]或[Ignored]
本系列主機板具有電壓監視的功能，用來確保主機板接受正確的電壓準
位，以及穩定的電流供應。
2.6 啟動選單（Boot menu）
本選單可讓您改變系統啟動裝置與相關功能。請選擇一個選項並按下
＜Enter＞ 鍵來顯示子選單。
2.6.1 啟動裝置順序（BootDevicePriority）
1st~xxthBootDevice[1stFloppyDrive]
本項目讓您自行選擇開機片並排列開機裝置順序。依照 1st、2nd、3rd 順
序分別代表其開機裝置順序。而裝置的名稱將因使用的硬體裝置不同而有所
差異。設定值有；[xxxxx Drive] [Disabled]