User Guide

4-20 Chapter 2: BIOS setup

Legacy USB Support [Auto]

Allows you to enable or disable support for USB devices on legacy operating

systems (OS). Setting to Auto allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no

USB device is detected, the legacy USB support is disabled. Conguration options:

[Disabled] [Enabled] [Auto]

The Module Version and USB Devices Enabled items show the

auto-detected values. If no USB device is detected, the item shows None.

4.4.3 USB Conguration

The items in this menu allows you to change the USB-related features. Select an

item then press <Enter> to display the conguration options.

USB Conguration

Module Version - 2.24.0-11.4

USB Devices Enabled:

None

Legacy USB Support [Auto]

Port 64/60 Emulation [Disabled]

USB 2.0 Controller Mode [HiSpeed]

BIOS EHCI Hand-Off [Enabled]

4.4.2 LAN Cable Status

POST Check LAN Cable [Disabled]

Enables or disables checking of the LAN cable during the Power-On Self-Test

(POST). Conguration options: [Disabled] [Enabled]

Select Screen

Select Item

Change Field

Tab Select Field

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Advanced

POST Check LAN cable [Disabled]

LAN Cable Status

Pair Status Length

1-2 N/A

3-6 N/A

4-5 N/A

7-8 N/A

1-2 N/A

3-6 N/A

4-5 N/A

7-8 N/A

Check LAN cable during

POST.