User Manual

ASUS NCLV-D (A)ASUS NCLV-D (A)

ASUS NCLV-D (A)

2-12-1

2-1

Onboard LEDOnboard LED

Onboard LED

The motherboard comes with a standby power LED. The green LED lights

up to indicate that the system is ON, in sleep mode, or in soft-off mode.

This is a reminder that you should shut down the system and unplug the

power cable before removing or plugging in any motherboard component.

The illustration below shows the location of the onboard LED.

2.1 Before you proceed

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or to

a metal object, such as the power supply case, before handling

components to avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

•

Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensure

that the power supply is switched off or the powerthat the power supply is switched off or the power

that the power supply is switched off or the power

cord is detached from the power supply. cord is detached from the power supply.

cord is detached from the power supply. Failure to do so

may cause severe damage to the motherboard, peripherals, and/or

components.

NCLV-D

NCLV-D Onboard LED

SB_PWR1

OFF

Powered

Off

Standby

Power