User's Manual

38 ASUS Mini PC PB60 Series
Installing top memory module
IMPORTANT!
• Refer to http://www.asus.com for the list of compatible DIMMs.
You can only install DDR4 SO-DIMMs to the Mini PC’s DIMM slot.
• Only ASUS-authorized technicians should remove and install
motherboard and mechanical parts inside your Mini PC. Please
refer to the terms and conditions in the warranty card.
• Visit an authorized ASUS service center or retailer for
information on module upgrades for your Mini PC.
1. (optional) Remove the storage bay if a storage bay is installed. Follow
step 2 under the Installing 2.5” HDD or SSD section to remove the
storage bay.
2. Remove the two (2) screws securing the fan (A), then disconnect the
fan connector (B) and lift the fan upwards so that it is perpendicular to
the heatsink (C), but do not remove the fan completely.