User Guide

3-22
Chapter 3: BIOS setup
Chapter 3
Power Fast Ramp Response [Auto]
Allows you to increase to enhance the response of the voltage regulator
during the load transient.
Conguration options: [Auto] [0.00] - [1.50]
CPU Internal Power Saving Control
Power Saving Level 1 Threshold [Auto]
Lower value provides sufcient overclocking tolerance to enlarge the
overclocking potential. Higher value provides better power-saving condition.
Use <+> or <-> key to adjust the value. The values range from 0A to 80A at
1Amp increment.
Power Saving Level 2 Threshold [Auto]
Lower value provides sufcient overclocking tolerance to enlarge the
overclocking potential. Higher value provides better power-saving condition.
Use <+> or <-> key to adjust the value. The values range from 0A to 50A at
1Amp increment.
Power Saving Level 3 Threshold [Auto]
Lower value provides sufcient overclocking tolerance to enlarge the
overclocking potential. Higher value provides better power-saving condition.
Use <+> or <-> key to adjust the value. The values range from 0A to 30A at
1Amp increment.
Fully Manual Mode [Enabled]
Allows you to enable or disable the support for voltage control via ROG Connect or OC
Panel. Conguration options: [Enabled] [Disabled]
Max Vcore [Disabled]
When Enabled, you can set the CPU Core Voltage to a value almost as high as the CPU
Input Voltage. Conguration options: [Enabled] [Disabled]
This allows you to set a very high CPU Core Voltage.
CPU Core Voltage [Auto]
Congures the amount of Voltage fed to the Cores of the processor. Increase when
increasing Core Frequency. Use <+> or <-> key to adjust the value. Conguration options:
[Auto] [Manual Mode] [Offset Mode]
Max Cache Voltage [Disabled]
When Enabled, you can set the CPU Core Voltage to a value almost as high as the CPU
Input Voltage. Conguration options: [Enabled] [Disabled]
This allows you to set a very high CPU Core Voltage.
CPU Cache Voltage [Auto]
Congures the amount of Voltage fed to the UNCore of the processor including it is cache.
Increase when increasing CPU Cache Frequency. Use <+> or <-> key to adjust the value.
Conguration options: [Auto] [Manual Mode] [Offset Mode]