Motherboard M2N-VM DH
E2684 First Edition V1 August 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices................................................................................................. vi Safety information...............................................................................vii M2N-VM DH specifications summary...................................................viii Chapter 1: Product introduction 1.1 Welcome!............................................................................... 1-2 1.2 Package contents......................................................
Contents Chapter 2: BIOS setup 2.1 2.2 2.3 2.4 iv Managing and updating your BIOS......................................... 2-2 2.1.1 ASUS Update utility................................................. 2-2 2.1.2 Creating a bootable floppy disk............................... 2-5 2.1.3 ASUS EZ Flash 2 utility............................................. 2-6 2.1.4 Updating the BIOS.................................................... 2-7 2.1.5 Saving the current BIOS file..........................
Contents 2.5 2.6 2.7 2.8 Power menu......................................................................... 2-30 2.5.1 ACPI Suspend Type................................................ 2-30 2.5.2 ACPI APIC Support................................................. 2-31 2.5.3 APM Configuration................................................. 2-31 2.5.4 Hardware Monitor................................................... 2-33 Boot menu.................................................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
M2N-VM DH specifications summary CPU Support AMD socket AM2 for AMD Athlon™ 64FX/ Athlon™ 64 X2/Athlon™ 64/Sempron processors AMD64 architecture enables simultaneous 32-bit and 64-bit computing Supports AMD Cool ‘n’ Quiet™ Technology AMD Live!™ Ready Chipset NVIDIA® GeForce™ 6100/nForce™ 430 MCP Front Side Bus 2000/1600 MT/s Memory Dual-channel memory architecture 4 x 240-pin DIMM sockets support up to 8 GB of unbufferred non-ECC 800/667/533 MHz DDR2 memory modules Expansion slots 1 x PCI E
M2N-VM DH specifications summary LAN Broadcom® BCM5071A2 PHY Gigabit LAN controller Wireless LAN: 54 Mbps IEEE 802.11b/g (ASUS WiFi-AP Solo™) IEEE 1394 TI 1394 controller supports: - 2 x IEEE 1394a connectors (1 at mid-board, 1 on the rear panel) USB Supports up to 8 USB 2.0 ports ASUS Digital Home features ASUS WiFi-AP Solo - 54 Mbps IEEE 802.11g and backwards compatible with 11 Mbps IEEE 802.
M2N-VM DH specifications summary Rear panel 1 x LAN (RJ-45) port 4 x USB 2.
This chapter describes the motherboard features and the new technologies it supports.
1.1 Welcome! Thank you for buying an ASUS ® M2N-VM DH motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items.
AMD Cool ‘n’ Quiet Technology The motherboard supports the AMD Cool ‘n’ Quiet Technology, which monitors system operation and automatically adjusts CPU voltage and frequency for a cool and quiet operating environment. See page 2-23 for details.
Serial ATA I/II technology and SATA-On-The-Go The motherboard fully supports the Serial ATA II 3.0 Gb/s technology through the Serial ATA interfaces and the Intel® ICH7R MCH. The Serial ATA 3 Gb/s specification provides twice the bandwidth of the current Serial ATA products with a host of new features, including Nativa Command Queueing (NCQ), and Power Management (PM) Implementation Algorithm. Serial ATA allows for thinner, more flexible cables with lower pin count and reduced voltage required.
1.3.2 Innovative ASUS features CrashFree BIOS 2 This feature allows you to restore the original BIOS data from the support CD in case when the BIOS codes and data are corrupted. This protection eliminates the need to buy a replacement ROM chip. See page 2-10 for details. ASUS EZ Flash 2 ASUS EZ Flash 2 is a user-friendly BIOS update utility. Simply press the predefined hotkey to launch the utility and update the BIOS without entering the OS.
S/PDIF digital sound ready This motherboard provides convenient connectivity to external home theater audio systems via coaxial and optical S/PDIF-out (SONY-PHILIPS Digital Interface) jack. It allows to transfer digital audio without converting to analog format and keeps the best signal quality. See pages1-35 for details.
ASUS MP3-In™ A convenient interface between computers and MP3 players, the ASUS MP3-In™ feature enables MP3 players to connect to PC speakers even when the PC power is off, which means that users can enjoy the sound quality from PC speakers without additional stereo equipment cost. (Refer to the ASUS MP3-In™ quick installation guide for details.
1.4 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity • Hold components by the edges to avoid touching the ICs on them.
1.5 Motherboard overview 1.5.1 Motherboard layout 24.5cm (9.6in) PWR_FAN ADP3186 CPU_FAN Super I/O DVI FLOPPY EATXPWR PRI_IDE CHA_ FAN USBPW34 USBPW56 24.5cm (9.
1.5.2 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. 1.5.3 Screw holes Place eight (8) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard.
1.6 Central Processing Unit (CPU) The motherboard comes with a 940-pin AM2 socket designed for the AMD Athlon™ 64 X2/Athlon™ 64/Athlon™ FX/Sempron™ processor. The AM2 socket has a different pinout from the 940-pin socket designed for the AMD Opteron™ processor. Make sure you use a CPU is designed for the AM2 socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 1.6.
3. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. 4. Carefully insert the CPU into the socket until it fits in place. Small triangle Gold triangle The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU! 5. When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
1.6.2 Installing the heatsink and fan The AMD Socket AM2 Athlon™ 64 X2/Athlon™ 64/Athlon™ FX/Sempron™ processor require a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Make sure that you use only qualified heatsink and fan assembly. Follow these steps to install the CPU heatsink and fan. 1. Place the heatsink on top of the installed CPU, making sure that the heatsink fits properly on the retention module base.
2. Attach one end of the retention bracket to the retention module base. 3. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place. Make sure that the fan and heatsink assembly perfectly fits the retention mechanism module base; otherwise, you cannot snap the retention bracket in place. 4.
1.7 System memory 1.7.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket.
* For dual-channel memory configuration (2), you may: • install identical DIMMs in all four sockets OR • install an identical DIMM pair in DIMM_A1 and DIMM_B1 (yellow sockets) and another identical DIMM pair in DIMM_A2 and DIMM_B2 (black sockets) * Always use identical DDR2 DIMM pairs for dual-channel model. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. Visit the ASUS website (www.asus. com) for the latest Qualified Vendors List.
Qualified Vendors Lists (QVL) DDR2-800 MHz capability Size 512MB 1024MB 512MB 256MB 512MB 512MB 1024MB 512MB 1024MB 512MB 1024MB 512MB 1024MB 1024MB 512MB 512MB 512MB 1024MB 256MB Vendor KINGSTON KINGSTON SAMSUNG SAMSUNG Qimonda Hynix Hynix MICRON MICRON MICRON MICRON MICRON MICRON CORSAIR A-DATA A-DATA Crucial Crucial Apacer Model Brand K4T51083QC K4T51083QC EDD339XX K4T51163QC-ZCE7 HYB18T256800AF25F HY5PS12821BFP-S5 HY5PS12821BFP-S5 5JAIIZ9DQQ 5JAIIZ9DQQ 5ZD22D9GKX 5ZD22D9GKX 6CD22D9GKX 6CD22D9GKX Hea
DDR2-533 MHz capability Size 256MB 512MB 1024MB 512MB 256MB 512MB 1024MB 2048MB 256MB 512MB 1024MB 512MB 512MB 1024MB 1024MB 512MB 1024MB 512MB 512MB 256MB 256MB 512MB 1024MB 512MB 1024MB Vendor Model KINGSTON KINGSTON KINGSTON Qimonda Qimonda Qimonda Qimonda Qimonda Qimonda Qimonda Qimonda Hynix Hynix Hynix Hynix Hynix Hynix ELPIDA ELPIDA Apacer KINGMAX KINGMAX KINGMAX KINGMAX KINGMAX E5116AF-5C-E HYB18T512800AF37 5YDIID9GCT HYB18T512800AC37 HYB18T512160AF-3.
1.7.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. 2 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 3. 3 1 1 Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated. • • 1.
1.8 Expansion slots In the future, you may need to install expansion cards. The following sub‑sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.8.1 Installing an expansion card To install an expansion card: 1.
Standard interrupt assignments IRQ Priority 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 – 11 12 13 14 15 3 4 5 6 7 8 9 10 Standard Function System Timer Keyboard Controller Re-direct to IRQ#9 IRQ holder for PCI steering* Communications Port (COM1)* IRQ holder for PCI steering* Floppy Disk Controller Printer Port (LPT1)* System CMOS/Real Time Clock IRQ holder for PCI steering* IRQ holder for PCI steering* IRQ holder for PCI steering* PS/2 Compatible Mouse Port* Numeric Data Processor Primary IDE Channel
1.8.3 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot. 1.8.4 PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. The following figure shows a network card installed on the PCI Express x1 slot. 1.8.
1.9 1. Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the onboard battery. 3.
2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78, USBPW910) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes. The USBPW12 and USBPW34 jumpers are for the rear USB ports. The USBPW56 is for the WiFi-AP module. The USBPW78 and USBPW910 jumpers are for the internal USB connectors that you can connect to additional USB ports.
3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 500 mA on the +5VSB lead, and a corresponding setting in the BIOS. KBPWR 1 2 2 3 +5V (Default) +5VSB M2N-VM DH R M2N-VM DH Keyboard Power Setting 4.
1.10 Connectors 1.10.1 Rear panel connectors 1 18 2 17 16 3 4 15 14 56 7 8 13 12 11 9 10 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 3. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 4. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
9. Antenna jack. This jack is on the onboard wireless LAN module that allows you to set up a wireless network and exchange information with other wireless devices without tangling cables and wires. Connect the moveable omni-directional antenna to this jack. 10. ASUS Wi-Fi AP Solo™ LED indicator. The ASUS Wi-Fi AP Solo™ comes with a green data transmission LED (AIR). For more information, refer to the ASUS Wi-Fi AP Solo™ user guide. 11. Line Out port (lime). This port connects a headphone or a speaker.
16. IEEE 1394a port. The 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. 17. S/PDIF Out port. This port connects an external audio output device via a S/PDIF cable. 18. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. 1.10.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable.
2. IDE connectors (40-1 pin PRI_IDE) The onboard IDE connector is for Ultra DMA 133/100/66 signal cable(s). There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device(s).
3. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap.
5. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) These connectors are for the Serial ATA signal cables for Serial ATA 3.0 Gb/s hard disk and optical disk drives. The Serial ATA 3 Gb/s is backward compatible with Serial ATA 1.5Gb/s specification. The current Serial ATA I interface allows up to 150 MB/s data transfer rate while Serial ATA II allows up to 300 MB/s data transfer rate, faster than the standard parallel ATA with 133 MB/s (Ultra DMA133).
6. CPU, Chassis, Power, and Chip Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN, 3-pin PWR_FAN, 3-pin CHIP_FAN) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors.
8. USB connectors (10-1 pin USB56, USB78) USB78 USB910 USB+5V USB_P10USB_P10+ GND NC USB+5V USB_P8USB_P8+ GND NC These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. M2N-VM DH 1 1 USB+5V USB_P9USB_P9+ GND USB+5V USB_P7USB_P7+ GND R M2N-VM DH USB 2.
10. JMicron ® JMB363 Serial ATA connector (7-pin SATA_RAID1 [black]) This connector is for a Serial ATA signal cable for a Serial ATA hard disk drive that you can combine with an external Serial ATA 3.0 Gb/s device to configure a RAID 0, and RAID 1 set through the onboard Jmicron® JMB363 SATA RAID controller. Refer to Chapter 5 for details on how to set up Serial ATA RAID configurations.
11. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
13. Parallel port connector (26-1 pin LPT) This connector is for a parallel port. Connect the parallel port module cable to this connector, then install the module to a slot opening at the back of the system chassis. LPT M2N-VM DH R SLCT PE BUSY ACK# PD7 PD6 PD5 PD4 PD3 PD2 PD1 PD0 STB# GND GND GND GND GND GND GND GND SLIN# INIT# ERR# AFD 1 M2N-VM DH Parallel Port Connector The parallel port cable is purchased separately. 14.
15. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • We recommend that you use an ATX 12 V Specification 2.0‑compliant power supply unit (PSU) with a minimum of 300 W power rating. This PSU type has 24-pin and 4-pin power plugs.
16. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. SPKR +5V Ground Ground Speaker PLED- PLED+ PWR LED HD LED R Reset Ground M2N-VM DH PWR Ground IDE_LED+ IDE_LED- PA NEL RESET PWR BTN * Requires an ATX power supply M2N-VM DH System Panel Connector • System power LED (2-pin PWR LED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
2.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a floppy disk/ USB flash disk or the motherboard support CD.) 3. Award BIOS Flash Utility (Updates the BIOS in DOS mode using a bootable floppy disk.) 4.
Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from the Internet option from the drop‑down menu, then click Next. ASUS M2N-VM DH 3.
4. From the FTP site, select the BIOS version that you wish to download. Click Next. 5. Follow the screen instructions to complete the update process. The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 2- 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
2.1.2 1. Creating a bootable floppy disk Do either one of the following to create a bootable floppy disk. DOS environment a. Insert a 1.44MB floppy disk into the drive. b. At the DOS prompt, type format A:/S then press . Windows® XP environment a. Insert a 1.44 MB floppy disk to the floppy disk drive. b. Click Start from the Windows® desktop, then select My Computer. c. Select the 3 1/2 Floppy Drive icon. d. Click File from the menu, then select Format. A Format 3 1/2 Floppy Disk window appears.
2.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing + during the Power-On Self Tests (POST). To update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard. 2.
2.1.4 Updating the BIOS The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. 1. Download the latest BIOS file from the ASUS web site. Rename the file to M2N-VMDH.BIN and save it to a floppy disk, CD ROM or a USB flash disk in FAT 16/12 format. Save only the updated BIOS file in the floppy disk to avoid loading the wrong BIOS file. 2. Copy the AwardBIOS Flash Utility (awdflash.
7. Press when the utility prompts you to save the current BIOS file. The following screen appears. 8. The utility verifies the BIOS file in the floppy disk, CD ROM or a USB flash disk and starts flashing the BIOS file. AwardBIOS Flash Utility for ASUS V1.17 (C) Phoenix Technologies Ltd. All Rights Reserved For MCP61-M2N-VM-DH-00 DATE: 04/13/2006 Flash Type - Winbond W39V080A 4Mb LPC File Name to Program: M2N-VMDH.
2.1.5 Saving the current BIOS file You can use the AwardBIOS Flash Utility to save the current BIOS file. You can load the current BIOS file when the BIOS file gets corrupted during the flashing process. Make sure that the floppy disk, CD ROM or a USB flash disk has enough disk space to save the file. To save the current BIOS file using the AwardBIOS Flash Utility: 1. Follow steps 1 to 6 of the previous section. 2. Press when the utility prompts you to save the current BIOS file.
2.1.4 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD, or the floppy disk that contains the updated BIOS file. • Prepare the motherboard support CD, or the floppy disk containing the updated motherboard BIOS before using this utility.
Recovering the BIOS from the support CD To recover the BIOS from the support CD: 1. Remove any floppy disk from the floppy disk drive, then turn on the system. 2. Insert the support CD to the optical drive. 3. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy...
2.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section “2.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run Setup.” This section explains how to configure your system using this utility. Even if you are not prompted to use the Setup program, you can change the configuration of your computer in the future.
2.2.1 BIOS menu screen Menu items Main Menu bar Advanced Power Configuration fields Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Legacy Diskette A: 15 : 30 : 36 Mon, Mar 2 2006 [1.44M, 3.5in.
2.2.3 Legend bar At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions.
2.2.7 Pop-up window Select a menu item then press to display a pop-up window with the configuration options for that item. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Legacy Diskette A: 15 : 30 : 36 Mon, Mar 2 2006 [1.44M, 3.5in.] Primary IDE MasterLegacy Diskette[ST321122A] A: Primary IDE Slave [ASUS CDS520/A] SATA1 [None] Disabled ...... [ ] SATA2 360K , 5.25 in [None] ...... [ ] SATA3 1.2M , 5.25 in [None] ...... [ ] SATA4 720K , 3.
2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section “2.2.1 BIOS menu screen” for information on the menu screen items and how to navigate through them. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Legacy Diskette A: 15 : 30 : 36 Mon, Mar 2 2006 [1.44M, 3.5in.
2.3.4 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press to display the IDE device information.
Access Mode [Auto] The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. Configuration options: [CHS] [LBA] [Large] [Auto] Capacity Displays the auto-detected hard disk capacity. This item is not configurable. Cylinder Shows the number of the hard disk cylinders. This item is not configurable. Head Shows the number of the hard disk read/write heads. This item is not configurable.
2.3.5 SATA1, SATA2, SATA3, SATA4 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information. Phoenix-Award BIOS CMOS Setup Utility Main SATA1 Select Menu Extended IDE Drive Access Mode [Auto] [Auto] Item Specific Help Capacity 0 MB Cylinder Head Landing Zone Sector 0 0 0 0 Slects the type of fixed disk connected to the system.
Head Shows the number of the hard disk read/write heads. This item is not configurable. Landing Zone Shows the number of landing zone per track. This item is not configurable. Sector Shows the number of sectors per track. This item is not configurable. After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk.
2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Select Menu JumperFree Configuration Item Specific Help CPU Configuration Chipset PCIPnP Onboard Device Configuration USB Configuration F1:Help ESC: Exit 2.4.
The following item becomes user-configurable when you set AI Tuning to [AI Overclocking]. Overclock Options [Disabled] Allows you to set the overclocking options. Configuration options: [Disabled] [Overclock 3%] [Overclock 5%] [Overclock 8%] [Overclock 10%] The following items become user-configurable when you set AI Tuning to [Manual]. CPU Multiplier [Auto] Allows you to set the operating CPU multiplier. The configuration options may vary depending on the type of CPU installed.
2.4.2 CPU Configuration Phoenix-Award BIOS CMOS Setup Utility Advanced Select Menu CPU Configuration CPU Type AMD Engineering Sample CPU Speed 2600MHz Cache RAM 1024K AMD Live! AMD cool‘n’Quiet Function Item Specific Help DRAM timing and control [Disabled] [Disabled] AMD Live! [Disabled] Enables or disables the AMD Live function. Configuration options: [Enabled] [Disabled] AMD cool ‘n’ Quiet Function [Disabled] Enables or disables the AMD cool ‘n’ Quiet.
DRAM Configuration The items in the sub-menu show the DRAM-related information autodetected by the BIOS. Phoenix-Award BIOS CMOS Setup Utility Advanced DRAM Configuration Timing Mode x Memory Clock Frequency Tcl Trcd Trp Tras 1T/2T Memory Timing [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] Select Menu Item Specific Help Auto, no user limit MaxMemclk, limit by Memory Clock value Manual, use Memory Clock value Timing Mode [Auto] Sets the Timing mode.
Tras [Auto] Configuration options: [Auto] [5] [6] [7] ~ [18] 1T/2T Memory Timing [Auto] Configuration options: [Auto] [1T] [2T] PCIE Spread Spectrum [Enabled] Enables or disables Spread Spectrum for PCI Express. Configuration options: [Disabled] [Enabled] SATA Spread Spectrum [Enabled] Enables or disables Spread Spectrum for SATA. Configuration options: [Disabled] [Enabled] HT Spread Spectrum [Center] Enables or disables Spread Spectrum for Hyper Transport.
2.4.4 PCIPnP Advanced Phoenix-Award BIOS CMOS Setup Utility PCIPnP x Select Menu Plug & Play O/S [No] Item Specific Help Resources Controlled By IRQ Resources [Auto] Select Yes if you are using a Plug and Play capable operating system Select No if you need the BIOS to configure non-boot devices ** PCI Express relative itmes ** Maximum Payload Size [4096] Plug & Play O/S [No] When set to [No], the BIOS configures all the devices in the system.
IRQ-xx assigned to When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] Maximum Payload Size [4096] Sets maximum TLP payload size for the PCI Express devices. The unit is byte. Configuration options: [128] [256] [512] [1024] [2048] [4096] 2.4.
IDE DMA transfer access [Enabled] Allows you to enable or disable the IDE DMA transfer access. Configuration options: [Disabled] [Enabled] IDE Prefetch Mode [Enabled] Allows you to enable or disable the IDE PIO read prefetch mode. Configuration options: [Disabled] [Enabled] Serial-ATA Configuration This sub-menu contains IDE function-related items. Select an item then press to edit.
HD Audio [Auto] Allows you to disable or set the High-Definition audio function. Configuration options: [Auto] [Disabled] Front Panel Support Type [AC97] Allows you to set the front panel audio support type. Configuration options: [AC97] [HD Audio] Onboard nVidia LAN [Disabled] Enables or disables the onboard NVIDIA® LAN controller. Configuration options: [Disabled] [Enabled] Onboard LAN Boot ROM [Disabled] Enables or disables the onboard LAN boot ROM.
2.4.6 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. Phoenix-Award BIOS CMOS Setup Utility Advanced Select Menu USB Configuration USB Controller USB Legacy support [V1.1+V2.0] [Enabled] Item Specific Help Enable or Disable USB 1.1 and 2.0 Controller USB Controller [V1.1+V2.0] Allows you to disable or set the onchip USB controller. Configuration options: [Disabled] [V1.1+V2.0] [V1.
2.5.2 ACPI APIC Support The Advanced Configuration and Power Interface (ACPI) support in the Application-Specific Integrated Circuit (ASIC) is enabled. This item is not user configurable. 2.5.
The computer cannot receive or transmit data until the computer and applications are fully running. Thus, connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on. Power On By RTC Alarm [Disabled] Allows you to enable or disable RTC to generate a wake event.
2.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options.
Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Configuration options: [xxx] [Ignored] CPU Fan Type [Auto] When set to Auto, the system automatically detects the CPU FAN during POST. This will increase the system boot-up time. Configuration options: [Auto] [3-Wire] [4-Wire] 2.6 Boot menu The Boot menu items allow you to change the system boot options.
1st ~ 4th Boot Device [Removable] These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Configuration options: [Removable] [Hard Disk] [CDROM] [Legacy LAN] [Disabled] 2.6.2 Removable Drives Phoenix-Award BIOS CMOS Setup Utility Boot Removable Drives Select Menu Item Specific Help 1. Floppy Disks 1.
2.6.
OS Select for DRAM > 64MB [Non-OS2] Set this item to OS2 only when you are running on an OS/2 operating system with an installed RAM of greater than 64 KB. Configuration options: [Non-OS2] [OS2] Full Screen LOGO [Enabled] Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Make sure that the above item is set to [Enabled] if you want to use the ASUS MyLogo™ feature. Halt On [All, But Keyboard] Allows you to error report type.
3. When prompted, confirm the password by typing the exact characters again, then press . The password field setting is changed to Set. To clear the password: 1. Select the password field and press twice. The following message appears: PASSWORD DISABLED !!! Press any key to continue... 2. Press any key to continue. The password field setting is changed to Clear. A note about passwords The Supervisor password is required to enter the BIOS Setup program preventing unauthorized access.
2.7 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the sub-menu. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Select Menu ASUS O.C.Profile EZ Flash 2 Item Specific Help Press [Enter] to Set. F1:Help ESC: Exit 4.7.1 ↑↓ : Select Item →←: Select Menu -/+: Change Value F5: Setup Defaults Enter: Select SubMenu ASUS O.C.
1. Insert the storage device that contains the “xxx.CMO” BIOS profile. 2. Turn on the system. 3. Enter BIOS setup program. Go to Tools then select Load from File and press . 4. Press to select the drive with the BIOS profile then press to load file. 5. Follow message screen when loading is finished. Update only a BIOS file coming from the same memory/CPU configuration and BIOS version.
4. Press to select the drive with the BIOS profile then press to load file. 5. Follow message screen when loading is finished. A pop-up message will inform you when the saving process is finished. ASUSTek O.C. Profile Utility B311 Current CMOS BOARD: M2N-VMDH VER: 04241.bin DATE: 05/12/2006 Update CMOS BOARD: Unknown VER: Unknown DATE: Unknown PATH: C:\M2N320C CMOS WINDOWS backup is done! Press any key to Exit.
2.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tool Exit Exit & Save Changes Exit & Discard Changes Load Setup Default Discard Changes F1:Help ESC: Exit and Exit ↑↓ : Select Item →←: Select Menu Select Menu Item Specific Help This option save data to CMOS and exiting the setup menu.
Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select YES to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. Discard Changes This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears.
2-44 Chapter 2: BIOS setup
This chapter describes the contents of the support CD that comes with the motherboard package.
3.1 Installing an operating system This motherboard supports Windows® 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 3.2 • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstallAll driver installation wizard. AMD Cool ‘n’ Quiet Driver Installs the AMD Cool ‘n’ Quiet driver. NVIDIA nForce 430 MCP Driver Installs the NVIDIA® nForce™ 430 MCP Driver program.
ASUS DH Remote Installs the ASUS DH Remote driver and application. 3.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll - Installation Wizard for Utilities Launches the ASUS InstallAll utilities installation wizard. ASUS Cool ‘n’ Quiet Utility This item installs the ASUS Cool ‘n’ Quiet utility. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in a Windows® environment.
Microsoft DirectX 9.0c The Microsoft® DirectX® 9.0c is a multimedia technology that enhances computer graphics and sounds. DirectX® improves the multimedia features of your computer so you can enjoy watching TV and movies, capturing videos, or playing games on your computer. Microsoft® Windows® XP Service Pack 2 already includes Microsoft® DirectX® 9.0c. If your system is Microsoft® Windows® XP Service Pack 2‑embedded, skip Microsoft® DirectX® 9.0c installation.
JMicron JMB36X 32bit RAID Driver Allows you to create an JMicron® JMB36X RAID driver disk for a 32-bit system. JMicron JMB36X 64bit RAID Driver Allows you to create an JMicron® JMB36X RAID driver disk for a 64-bit system. 3.2.5 Manual menu The Manual menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual files are in Portable Document Format (PDF).
3.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. 3.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard.
Browse this CD Displays the support CD contents in graphical format. Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support CD and a brief description of each in text format.
3.3 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing Windows® 2000/XP operating system on a hard disk drive that is included in a RAID set. To create a RAID driver disk: 1. Place the motherboard support CD into the CD-ROM drive. 2. Select Make Disk tab. 3. From the Make Disk menu, select the RAID driver disk you want to create or browse the contents of the support CD to locate the driver disk utility.
3-10 Chapter 3: Software support