Manual

ASUS KFN5-D SLI 5-11
5.3 Silicon Image RAID congurations
The Silicon Image Sil3132 RAID controller supports RAID 0 and RAID 1
congurations. Use the Silicon Image RAID utility to congure a disk array.
5.3.1 Setting the BIOS RAID items
After installing the hard disk drives, make sure to set the necessary RAID
items in the BIOS before setting your RAID conguration.
To set the BIOS RAID items:
1. Boot the system and press <Del> during the Power-On Self-Test
(POST) to enter the BIOS Setup Utility.
2. From the
Advanced > Onboard Devices Conguration menu item in the
BIOS set the Onboard Sil3132 SATALink item to RAID Mode and set
the Onboard Serial-ATA BOOTROM item to Enabled. See section “4.4.5
Onboard Devices Conguration” for details.
3. Save your changes and Exit Setup.
Launching the Silicon Image Array Management Software
Launch the Silicon Image Array Management software from Windows
®
XP by
clicking the Start button and selecting All Programs > Silicon Image > Sam
For details on the Silicon Image SATARaid™ RAID conguration, refer to
the “Sil3132 User’s Manual” in your motherboard support CD:
\Drivers\Sil3132\Raid\SATARAID5-UserGuide_v1.40.pdf