Computer Hardware User Manual

2-22

Chapter 2: Hardware information

3. Keyboard power (3-pin KBPWR)

This jumper allows you to enable or disable the keyboard wake-up

feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the

computer when you press a key on the keyboard (the default value is

[Disabled]). This feature requires an ATX power supply that can supply

at least 1A on the +5VSB lead, and a corresponding setting in the

BIOS (see section 4.5.1 Power Up Control).

K8V

K8V Keyboard Power Setting

(Defaul

+5V +5VSB

KBPWR

2312