User Manual

1. Use Milan CPU to boot up and check the BIOS version is now

Milan BIOS (0602 or 0502 can do)

* If no Milan CPU, please install each one of the supported CPUs

and plug in the power cable. The BMC LED will light up once the

on-board BMC is active. Please go to router/switch to get DHCP

to assign IP to login WEBUI.

2. Or you may try to modify Station IP address and Subnet mask

(IP address the same as Client PC domain

mask is 255.255.255.0) and press F10 to save

3. Enter https://192.168.1.20 (ESC8000A-E11 IP address)

Milan to Rome Dual BIOS update SOP

PAGE 1
Milan to Rome Dual BIOS update SOP 1. Use Milan CPU to boot up and check the BIOS version is now Milan BIOS (0602 or 0502 can do) * If no Milan CPU, please install each one of the supported CPUs and plug in the power cable. The BMC LED will light up once the on-board BMC is active. Please go to router/switch to get DHCP to assign IP to login WEBUI. 2. Or you may try to modify Station IP address and Subnet mask (IP address the same as Client PC domain mask is 255.255.255.0) and press F10 to save 3.
PAGE 2
Milan to Rome Dual BIOS update SOP 2. Log-in WEBUI again and use BIOS update function to update BIOS 0103 with CAP file which could be downloaded from ASUS website. a. Choose “Maintenance” and then “BIOS Update” b.
PAGE 3
Milan to Rome Dual BIOS update SOP 3. Upon BIOS completion, shut down and reboot 4.