E4123 Windows® XP Edition Quick Use Guide 15G06Q062000
Powering on your Eee PC These are only quick instructions for using your Eee PC. Read the full manual for detailed information. 1 1. Install the battery pack 2. Connect the AC power adapter 2 1 2 3. Turn ON the Eee PC 1 Damage may occur if you use a different adapter to power the Eee PC. You may damage both your battery pack(s) and the Eee PC with a faulty AC-DC adapter.
Shutdown Do the following instructions to turn down your Eee PC. 1. 2. Click the start button to display the start menu. Click Turn Off Computer. 2 1 3. Select Turn Off to power off your Eee PC.
Launching for the First Time For the first time you start your Eee PC, the Windows wizard will launch automatically and lead you through setting up your preferences and some basic information. Follow the wizard instructions to finish the initialization. Configuring a network connection Wireless Network Connection 1. Double-click the crossed wireless network icon Notification area. in the If the wireless connection icon does not show in the Notification area.
3. When connecting, you may have to enter a password. 4. After a connection has been established, the connection is shown on the list. 5. You can see the wireless network icon in the Notification area. The wireless connection icon disappears when you Press ( + ) to disable the WLAN function.
Local Area Network To establish a wired network, follow the instructions below: Using a dynamic IP: 1. Right-click the network icon with a yellow warning triangle on the Windows® taskbar and select Open Network Connections. 2. Right-click Local Area Connection and select Properties. 3. 4. Click Internet Protocol (TCP/IP) and click Properties. Click Obtain an IP address automatically and click OK.
5. Click Create a new 6. connection to start the New Connection Wizard. Click Next. 7. Select Connect to the Internet and click Next. 8. Select Set up my connection manually. 9. Select your connection type and click Next. 10. Enter your ISP Name and click Next.
11. Enter your User name and Password. Click Next. 12 Click Finish to finish the configuration. 13. Enter your user name and password. Click Connect to connect to the Internet. Using a static IP: 1. 2 3. 4. 5. Repeat the step 1–3 of Using a dynamic IP to start the static IP network configuration. Click Use the following IP address. Enter the IP address, Subnet mask and Gateway from your service provider. If needed, enter the preferred DNS Server address and alternative address.