Grafikkort Mjukvarureferens
SW1729 Första utgåvan V1 2005 Copyright © 2005 ASUSTeK COMPUTER INC. Alla rättigheter förbehållna. Ingen del av denna manual, inklusive produkterna och mjukvaran som beskrivs i den, får reproduceras, överföras, kopieras, lagras i ett system för hämtning av information, eller översättas till något språk i någon form eller på något sätt, bortsett från den dokumentation som sparas av köparen för säkerhetskopiering, utan särskilt skriftligt tillstånd från ASUSTeK COMPUTER INC. ("ASUS").
Innehåll Meddelanden ....................................................................................... iv Säkerhetsinformation ........................................................................... v Om denna guide .................................................................................. vi 1. 2. 3. 4. 5. 6. 7. ASUS GameFace Messenger .................................................... 1 1.1 Introduktion ............................................................... 1 1.
Meddelanden Federal Communications Commission Statement Denna utrustning motsvarar del 15 i FCCs regelverk. Drift av datorn får ske på följande två villkor: • • Denna utrustning får inte orsaka skadliga störningar, och Denna utrustning måste acceptera all mottagen störning som kan orsaka oönskad drift. Utrustningen har testats och motsvarar kraven för digital utrustning i klass B enligt del 15 i FCCs regelverk. Dessa krav har utformats för att ombesörja rimligt skydd mot skadliga störningar i bostadshus.
Säkerhetsinformation Elsäkerhet • • • Då annan utrustning tillsätts eller avlägsnas från systemet, se till att strömkablarna till utrustningen är urkopplade innan signalkablarna ansluts. Om möjligt, koppla ur alla strömkablar från det existerande systemet innan du ansluter en ny enhet. Se till att din elförsörjning är inställt på korrekt spänning för ditt område. Om du inte är säker på spänningen i det elektriska uttag du använder, kontakta ditt lokala elbolag.
Om denna guide Symboler som används i denna guide För att se till att du utför vissa uppgifter korrekt, skall du notera följande symboler som används i manualen. VARNING: Information för att undvika att skada dig då du utför en uppgift. FÖRSIKTIGT: Information för att undvika att komponenterna skadas du utför en uppgift. VIKTIGT: Information som du MÅSTE följa då du utför en uppgift. ANMÄRKNING: Tips och ytterligare information för utförande av en uppgift.
1. ASUS GameFace Messenger 1 . 1 Introduktion ASUS GameFace Messenger möjliggör text, ljud eller bildkommunikation i realtid med andra användare av GameFace Messenger. Det här verktyget möjliggör funktioner för point-to-point videokonferenser samt för nätverksspelande att äga rum samtidigt. 1 . 2 Komma igång 1.2.1 Starta ASUS GameFace Messenger Starta ASUS GameFace Messenger: Klicka på S t a r t ( S t a r t ))- knappen. Välj G a m e F a c e M e s s e n g e r från menyn Windows, Alla program.
2 2. Klicka R e g i s t e r N e w A c c o u n t ( R e g i s t r e r a n y t t k o n t o ) på följande webbsida. 3. Knappa in din personliga information och klicka sedan på R E G I S T E R N O W ( R E G I S T R E R A N U ) när du är klar. 4. Följ efterföljande instruktioner på skärmen för att slutför registreringsprocessen.
1.2.3 Logga in på GameFace Messenger Logga in på GameFace Messenger: 1. Om GameFace Messenger inte är inställd på att automatiskt logga in dig när du är ansluten till internet, klicka F i l e ( F i l ) > S i g n I n (Logga in) - eller Klicka på C l i c k h e r e t o s i g n i n ( K l i c k a h ä r f ö r a t t l o g g a i n ) i huvudmenyn. Följande fönster kommer fram. 2.
1.2.4 Logga ut GameFace Messenger Logga ut från GameFace Messenger: Från menyn GameFace Messenger klickar du F i l e ( F i l ) > S i g n O u t ( L o g g a u t )). 1.2.5 Njud in användare till en GameFace Messenger-konferens Bjuda in användare till en GameFace Messenger-konferens: 1. 2. 4 Högerklicka med musen på en användare som är online. Från pop-upmenyn klickar du I n v i t e G a m e F a c e C o n f e r e n c e ( B j u d i n t i l l G a m e F a c e k o n f e r e n d )).
3. ASUS GameFace Messenger tillåter max åtta (8) användare att ansluta sig till konferensen. Följande skärm visar en 4-vägskonferens. 4. Tryck på snabbtangenten för OnScreen Display (OSD) för att visa OSD-menyn. Markera rutan för E n a b l e G a m e f a c e ( A k t i v e r a G a m e f a c e ) för att visa GameFace Messenger samtidigt som du spelar ett helskärmsspel.
1.2.6 Ändra användarnamnet Ändra användarnamnet: Från menyn GameFace Messenger klickar du T o o l s ( V e r k t y g ) > C h a n g e D i s p l a y N a m e ( Ä n d r a a n v ä n d a r n a m n )). Följ instruktioner på skärmen. 1.2.7 Ändra status Ändra din status: Från menyn GameFace Messenger klickar du T o o l s ( V e r k t y g ) > C h a n g e M y S t a t u s ( Ä n d r a m i n s t a t u s )), och väljer sedan från följande lista.
1 . 3 Kontakter 1.3.1 Skapa ny kontakt Skapa ny kontakt: Från menyn GameFace Messenger klickar du på C o n t a c t ( K o n t a k t ) > A d d a C o n t a c t ( L ä g g t i l l e n k o n t a k t )). Följ instruktioner på skärmen. 1.3.2 Radera en kontakt Radera en existerande kontakt: Från menyn GameFace Messenger klickar du på C o n t a c t ( K o n t a k t ) > D e l e t e a C o n t a c t ( R a d e r a e n k o n t a k t )). Följ instruktioner på skärmen.
1.3.3 Ändra kontaktvy Ändra kontaktlistevyn: Från menyn GameFace Messenger klickar du på C o n t a c t ( K o n t a k t ) > V i e w C o n t a c t ( S e k o n t a k t ) och välj sedan att visa kontakt B y D i s p l a y N a m e ( P å a n v ä n d a r n a m n ) eller B y E m a i l ( P å e - p o s t )). 1.3.
1.3.5 Skapa grupper Grupper gör det möjligt för dig att organisera dina kontakter i olika kategorier. Skapa ny grupp: Från menyn GameFace Messenger klickar du på C o n t a c t ( K o n t a k t ) > C r e a t e a N e w G r o u p ( S k a p a e n n y g r u p p )). Följ instruktioner på skärmen. 1.3.6 Radera grupper Radera en grupp: Från menyn GameFace Messenger klickar du på C o n t a c t ( K o n t a k t ) > D e l e t e a G r o u p ( R a d e r a e n g r u p p )). Följ instruktioner på skärmen. 1 .
1.4.2 Skicka en fil Skicka en fil: 1. 2. Dubbelklicka på en ansluten användare. Klicka på T o o l s ( V e r k t y g ) > S e n d a F i l e o r P h o t o ( S k i c k a e n f i l e l l e r f o t o )). Följ instruktioner på skärmen för att skicka en fil eller ett foto. 1.4.3 Skicka ett e-postmeddelande Skicka ett e-postmeddelande: 1. 2. Dubbelklicka på en ansluten användare. Klicka på T o o l s ( V e r k t y g ) > S e n d E m a i l ( S k i c k a e - p o s t ) .
1 . 5 Inställningar 1.5.1 Allmänt Visa allmänna inställningar: 1. Från menyn GameFace Messenger klickar du T o o l s ( V e r k t y g ) > Option (Alternativ) > General setting (Allmänna i n s t ä l l n i n g a r ) . Följande fönster kommer fram. Markera kryssrutan för att aktivera eller avaktivera ett alternativ. Knappa in ditt användarnamn Knappa in antalet minuter innan din status visar “Frånvarande(Away)”. Markera kryssrutan för att aktivera eller avaktivera ett alternativ. 2.
1.5.2 Privat Visa privatinställningar: 1. Från menyn GameFace Messenger klickar du T o o l s ( V e r k t y g ) > O p t i o n ( A l t e r n a t i v ) > P r i v a c y S e t t i n g ( P r i v a t i n s t ä l l n i n g a r )). Följande fönster kommer fram. Markera kryssrutan för att aktivera eller avaktivera ett alternativ. Välj ett alternativ från listan och klicka sedan Allow<<(< > ( B l o c k e r a > > )).. 2.
1.5.3 Proxy Visa proxyinställningar: 1. Från menyn GameFace Messenger klickar du T o o l s ( V e r k t y g ) > O p t i o n ( A l t e r n a t i v ) > P r o x y S e t t i n g ( P r o x y i n s t ä l l n i n g a r )). Följande fönster kommer fram. Ställ in proxyserver/ mellanserver Knappa in proxynamn och port Markera kryssrutan för att aktivera eller avaktivera ett alternativ Knappa in användarnamn och lösenord för autentisiering 2.
1.5.4 Skal Visa skalinställningar: 1. Från menyn GameFace Messenger klickar du T o o l s ( V e r k t y g ) > O p t i o n ( A l t e r n a t i v ) > S k i n S e t t i n g ( S k a l i n s t ä l l n i n g a r )). Följande fönster kommer fram. Välj bland tillgängliga skal Klicka för att tillämpa inställningar 2. 14 Klicka O K ( O K ) för att tillämpa inställningar eller C a n c e l ( A v b r y t ) för att bortse från förändringar och återgå till huvudmenyn.
1.5.5 GameFace Visa GameFace-inställningar: 1. Från menyn GameFace Messenger klickar du T o o l s ( V e r k t y g ) > Option (Alternativ) > GameFace Setting (GameFacei n s t ä l l n i n g a r )). Följande fönster kommer fram. Tryck på snabbtangentskombination Markera kryssrutan för att aktivera eller avaktivera ett alternativ. Välj bild- och ingångsenhet Välj ljudenhet Dra regeln för att ställa in inspelningsvolym 2.
2. ASUS Splendid 2 . 1 Introduktion ASUS Splendid Video Enhancement Technology förbättrar avsevärt visningskvaliteten på ditt system. Använd det här alternativet för att justera kontrast, läge, eller förbättra visiningsregionen. 2 . 2 Starta ASUS Splendid Starta ASUS Splendid: 1. 16 Klicka på S t a r t ( S t a r t ))- knappen. Gå till C o n t r o l P a n e l ( K o n t r o l l p a n e l e n ) och ladda D i s p l a y ( V i s n i n g )).
2. Välj fliken A S U S och sedan A S U S S p l e n d i d för att få fram följande. Klicka för hjälp Klicka för att aktivera eller avaktivera ASUS Splendid Klicka för att justera Dynamic Contrast(dynamisk kontrast) Klicka för att ställa in region Klicka för att välja läge (se tabell nedan för detaljer) Förhandsvisa skärm Splendid lägestabell 3. LÄGE Beskrivning Enriched (Ökad) Rekommenderas för hemunderhållningssystem.
18 ASUS grafikkort
3. ASUS skärmmenyer (OSD) 3 . 1 Introduktion Funktionen ASUS skärmmeny gör det möjligt för dig att dynamiskt ändra skärmparametrarna när du spelar i helskärm 3D och OpenGL-spel. 3 . 2 Aktivera ASUS OSD Starta ASUS OSD: 1. 2. 3. 4. 5. Klicka på S t a r t ( S t a r t ))- knappen. C o n t r o l P a n e l ( G å t i l l K o n t r o l l p a n e l e n ) och ladda D i s p l a y ( V i s n i n g )).
4. ASUS GameLiveShow 4 . 1 Introduktion ASUS GameLive Show låter användare dela spelandeupplevelser i realtid när denne spelar helskärmsspel. Användare kan på avstånd övervaka en GameLive Show-sändning genom att använda webbläsaren Internet Explorer. Du kan också spela in och återspela dina spel genom att använda funktionen GameReplay. 4 . 2 Komma igång 4.2.1 Starta ASUS GameLiveShow och GameReplay Starta ASUS GameLiveShow: Dubbelklicka på ikonen G a m e L i v e S h o w 4.2.2 på skrivbordet.
4.2.3 GameReplay-inställning Inställningsmenyn för GameReplay låter dig ställa in upplösning, bildruteantal, filkatalog pcj snabbtangent för GameReplay. Klicka på ikonen för G A M E R E P L A Y S E T U P ( G A M E R E P L A Y – I N S T Ä L L N I N G A R ) för att få fram följande alternativ. Klicka för att visa inställningsalternativ Knappa in filkatalog eller klicka på knappen för att söka katalog Klicka för att välja upplösning Klicka för att ändra bildruteantal Klicka för att spara inställningar 4.2.
4.2.5 Aktivera GameReplay i OSD Aktiver GameReplay I OSD: 1. 2. 3. 22 I ett fullskärmsspel startar du OSD genom att använda OSDsnabbvalstangenterna. Välj G a m e L i v e S h o w S e t t i n g s ( G a m e L i v e S h o w wI N S T Ä L L N I N G A R ) och markera E n a b l e G a m e R e p l a y ( A k t i v e r a G a m e R e p l a y )). Tryck på snabbvaltangenterna för GameReplay (Ctrl+Alt+S) för att starta och stoppa inspelning.
4.2.6 Aktivera GameLiveShow i OSD Innan andra klienter kan förhandsgranska din sändning startar du skärmmenyn och aktiverar GameLiveShow. Aktivera GameLiveShow I OSD: 1. I ett fullskärmsspel startar du OSD genom att använda OSDsnabbvalstangenterna. 2. Välj G a m e L i v e S h o w S e t t i n g s ( G a m e L i v e S h o w wI N S T Ä L L N I N G A R ) och markera E n a b l e G a m e L i v e S h o w ( A k t i v e r a G a m e L i v e S h o w )). 3. Tryck (Slut) för att gå ur.
4.2.7 Inställning sekundär klient Innan en sekundär klient kan förhandsgranska en GameLiveShow-sändning måste du konfigurera dina säkerhetsinställningar i Internet Explorer. Konfigurera webbläsaren IE: 1. Starta Internet Explorer. 2. Gå in på T o o l s ( V e r k t y g ) > Internet Options (Internetalternativ). 3. Från dialogrutan Internetalternativ väljer du fliken för S e c u r i t y ( I n s t ä l l n i n g a r ) och klickar senda på ikonen för Trusted Sites (Pålitliga w e b b p l a t s e r )).
7. Klicka C u s t o m L e v e l ( N o r m a l n i v å ) för att visa fönstret för säkerhetsinställningar. 8. Aktivera alla alternative och klicka OK K. Klicka O K för att gå ur dialogrutan för Internetalternativ. 9.
4.2.8 Förhandsvisning av sekundär klient Efter att du har konfigurerat säkerhetsinställningarna för IE kan du starta en fjärr-förhandsgranskning av en GameLiveShow-sändning. Titta på en fjärr-förhandsgranskning: 26 1. I IE:s adressfält knappar du in IP-adressen till den dator som sändrer en GameLiveShow. 2. Klicka på Play (Spelaknappen) för att påbörja förhandsvisning.
5. ASUS SmartDoctor ASUS SmartDoctor är utformad för att övervaka temperaturen, spänningen och fläkten på ditt grafikkort. Det här verktyget kyler också smidigt ner temperaturen på din grafikprocessenhet (GPU) och låter dig justera tidsinställningen på grafikkortet. 5.1 Funktioner • Övervakar grafikprocessenhetens temperatur, fläkthastighet och spänning. • Upplyser användaren om ovanliga incidenter med hårdvara, som t ex överhettning, fel på fläkten samt spanning som är över säkerhetsnivån.
6. ASUS SmartDoctor Verktyget tillhandahåller en lättanvänd meny för att få tillgång till funktionerna. 6.1 Spänningsstatus Klicka på fliken för V o l t a g e s t a t u s ( S p ä n n i n g s s t a t u s ) för att få fram spänningsstatusen på grafikkortet. 6.2 • AGP buss VDDQ-spänning och AGP buss 3.3-spänning ska ha stadig levereans från ditt moderkort. Om inte kommer ditt system att krascha.
6.3 Status på fläkthastigheten Klicka på fliken F a n s p e e d ( F l ä k t h a s t i g h e t ) för att visa den aktuella fläkthastigheten på ditt grafikkort. 6.4 Inställningar för motor och minnestid Du kan manuellt justera motorn för grafikkortet (GPU) och minnestiden för att förbättra prestandan på ditt grafikkort. Justera motor- och minnestiden: 1. 2. Rör på regeln för E n g i n e ( M o t o r ) för att justera motorns tid. Rör på regeln för M e m o r y ( M i n n e ))för att justera minnets tid.
6.5 Avancerade funktionsinställningar Klicka i SmartDoctor-menyn för att starta dialogrutan för SmartDoctor-inställningar. 6.5.1 Inställningar För att ändra på inställningarna klickar du på fliken S e t t i n g s ( I n s t ä l l n i n g a r ) i dialogrutan för SmartDoctor-inställningar. Övervakningsinställningar Ändra övervakningsinställningar: 30 1. Klicka i den kombinerade listboxen för att ställa in M o n i t o r p o l l i n g time interval (Tidsintervall övervakningsavfrågning). 2.
6.5.2 Övervakning Byta övervakningsinställningar för spänning, temperatur och fläkt: 1. Klicka på fliken för M o n i t o r ( Ö v e r v a k n i n g ) från dialogrutan för SmartDoctor-inställningar. Inställningar spänningslarm • • Klicka i kryssrutan för att aktivera eller avaktivera larmet för AGPVDDQ (för AGP-kort) eller PCIE 12V (för PCIe-kort), VCC, FBVDDQ eller VCORE-spänningar. Flytta regeln för att justera procenttalet för spänningens felmarginal.
6.5.3 Fläktkontroll Ändra inställningarna för fläktkontroll: 1. Klicka på fliken för F a n C o n t r o l ( F l ä k t k o n t r o l l ) från dialogrutan för SmartDoctor-inställningar. 2. Klicka på alternativknappen för att välja function för fläktkontrollen. Fläktkontrollen har tre funktioner: Manuellt läge, SmartCooling och Automatisk fläktkontroll. M a n u a l m o d e ( M a n u e l l t l ä g e ) – du kan förändra fläkthastigheten genom att justera regeln för varje temperaturläge.
6.5.4 HyperDrive Ändra inställningarna för ASUS hyperdrive: 1. Klicka på fliken för H y p e r D r i v e ( H y p e r d r i v e ) från dialogrutan för SmartDoctor-inställningar. ASUS HyperDrive Aktivera hyperdrive: 1. Klicka i kryssrutan för E n a b l e H y p e r D r i v e ( A k t i v e r a h y p e r d r i v e ) för att aktivera eller avaktivera hyperdrivefunktionen. 2. Klicka på alternativknappen för att välja hyperdriveläget.
3. 4. 5. 34 När hyperdrive är aktiverad kan du aktivera M a n u a l H y p e r D r i v e C l o c k R a t e ( M a n u e l l a h y p e r d r i v e t i d s h a s t i g h e t e n ) och justera frekvensen med hjälp av regeln. Klicka D e f a u l t ( S t a n d a r d ) för att ladda optimala inställningar. Klicka A p p l y ( T i l l ä m p a ) för att tillämpa inställningar eller klicka O K ( O K ) för att spara inställningarna och gå ur.
7. ASUS VideoSecurity Online 7.1 Starta ASUS VideoSecurity Starta ASUS VideoSecurity: Från Aktivitetsfältet i Windows taskbar klickar du på S t a r t ( S t a r t k n a p p e n ) och väljer sedan A l l P r o g r a m s ( A l l a p r o g r a m ) - > A S U S - > A S U S V i d e o S e c u r i t y - > A S U S V i d e o S e c u r i t y för att få fram följande meny.
7.2 Inställning För att visa inställningsfönstret för ASUS VideoSecurity klickar du från menyn för ASUS VideoSecurity. 7.2.1 Huvudinställningar Avdelningen för huvudinställningar låter dig justerna avläsningskänsligheten, avläsningsintervallet och arbetskatalog. Den här avdelningen innehåller också kryssrutor för att aktivera ett antal olika funktioner, inräknat larm, autokörning, användning av multienheter samt inställning av avläsningsfördröjning.
• Temperatur och ljus kan påverka övervakning. • Kvaliteten på videomottagningsenheten är också mycket viktig i inställningarna av känsligheten. • Testa olika värden för att fininställa den här parametern för optimal prestanda. Ställa in parametern för avläsningsintervall Ställa in parameter för avläsningsintervall: Rör på regeln för D e t e c t i n g i n t e r v a l ( A v l ä s n i n g s i n t e r v a l l )).
Ställa in andra funktioner Aktivera eller avaktivera autokörningsfunktionen, larmet, användning av multienheter och/eller ställa in avläsningsfördröjning: • Klicka i kryssrutan för A u t o r u n d e t e c t w h e n p r o g r a m r u n ( A v l ä s n i n g a v a u t o k ö r n i n g n ä r p r o g r a m k ö r s ) för att aktivera eller avaktivera autokörningsfunktionen i ASUS VideoSecurity.
7.2.2 Läge Lägesavdelningen gör det möjligt för dig att konfigurera Avläsnings- och spårningsmetoden. Du ändrar lägesinställningarna genom att klicka alternativet M o d e ( L ä g e ) från inställningsdialogrutan för ASUS VideoSecurity. Följande undermeny kommer fram. Ställa in avläsningsläge Ställa in avläsningsläget: Klicka på alternativknappen för det läge du önskar.
Ställa in spårningsmetod Ställa in spårningsmetod: Klicka för att aktivera kryssrutan S t a r t t r a c i n g w h e n e v e r a c o n d i t i o n is detected (Starta spårning närhelst ett förhållande har u p p t ä c k t s )).
7.2.3 Inställningar för e-post Avdelningen för inställning för e-post innehåller e-postparameterna som behövs för att skicka ett e-postmeddelande när e-postlarmfunktionen är aktiverad. Du ändrar e-postinställningarna genom att klicka på alternativet E m a i l S e t t i n g ( E - p o s t i n s t ä l l n i n g ) från inställningsdialogrutan. Följande undermeny kommer fram. Använda e-postvarningsfunktionen Använda e-postvarningsfunktionen: 1.
2. Klicka på alternativet E m a i l S e t t i n g ( E - p o s t i n s t ä l l n i n g a r ) från dialogrutan för inställningar och klicka sedan för att aktivera S e n d out an email as warning (Skicka ett e-postmeddelande s o m v a r n i n g )). 3. Knappa in e-postadress (er) på mottagare, ämne och meddelandeinnehåll. Följande beskriver de här e-postparametrarna: • T o ( T i l l ) ––avser e-postadressen till huvudadressaten av varningen när VideoSecurity läser av en rörelse i övervakningsregionen.
4. Klicka S e n d i n g M a i l S e t t i n g s ( S k i c k a e - p o s t i n s t ä l l n i n g a r ) för att konfigurera e-postparametrarna. Följande fönster kommer fram. Om det är nödvändigt kan du rådgöra med din systemadministratör om behörighet och andra serverparameterinställningar. 4.1 Server Innehåller parametrar och protokoll som är nödvändiga för att skicka din e-post. Knappa in värdnamn/-adress, portnummer, e-postadress, autentifieringsmetod, användarnamn och lösenord.
4.2 Övrigt Övrigtgruppen innehåller diverse olika parametrar och serverinställningar. Se följande parameterbeskrivningar: Auto Connect to the Internet (Automatisk anslutning till i n t e r n e t ) - när den är aktiverat kommer funktionen att kontrollera om en internetanslutning redan finns. Om anslutningen mellan ditt IP och destinationse-postservern kan etableras kommer funktionen att ringa upp automatiskt. Klicka i kryssrutan för att aktivera eller avaktivera den här funktionen.
7.2.4 Inspelningsinställning Avdelningen Inspelningsinställning innehåller parametrar som gör det möjligt för dig att konfigurera inspelningslängden närhelst behovet uppstår. Du ställer in inspelningsparametrarna genom att klicka på alternativet R e c o r d s e t t i n g ( S p e l a i n i n s p e l n i n g ) från installationsdialogrutan. Följande undermeny kommer fram: Ställa in inspelningsparametrar: 1. 2. 3.
7.2.5 Enhet Enhetsavdelningen gör det möjligt för dig att ställa in videomottagarenhet och färginställningar. Du väljer en videomottagningsenhet eller justerar färginställningar genom att klicka alternativet D e v i c e S e t t i n g ( E n h e t s i n s t ä l l n i n g ) från inställningsdialogrutan för ASUS VideoSecurity Följande undermeny kommer fram: Konfigurera mottagarenhet Konfigurera enhet: 46 1. Klicka på listrutan för D e v i c e s ( E n h e t e r ) för att välja videomottagarenhet. 2.
3. Rör på regeln för att justera ljusstyrka, mättnar, kontrast och färgton. - ELLER Klicka D e f a u l t ( S t a n d a r d ) för att ladda rekommenderade värden. 4. Klicka O K för att spara inställningar och gå ur.
7.2.6 Avancerat Den avancerade avdelningen innehåller avancerade inställningar och parametrar för HTTP. Du konfigurerar de här alternativen genom att klicka på fliken A d v a n c e d ( A v a n c e r a t ) på inställningssidan. Om det är nödvändigt, rådgör med systemadministratören. Ställa in HTTP-server Aktivera HTTP-server och ställa in dess parametrar: 1. Klicka för att markera kryssrutan för E n a b l e H T T P S e r v e r ( A k t i v e r a H T T P - s e r v e r )). 2.
7.3 Videokälla Videokällan listar tillgängliga videoenheter som är installerade på ditt system. När den är tillgänglig kan du växla mellan olika typer av videokällor. 7.3.1 Inställningar videokälla Ställa in videokälla: 1. 2. Klicka på Videokälla från huvudmenyn V i d e o S e c u r i t y ( V i d e o s ä k e r h e t )). Från pop-uppmenyn väljer du från de tillgängliga videokällorna. Den utgående valda videokällan visas i den övre delen av skärmen.
7.4 Ställ in avläsning av region Avläsning av region är ett användardefinierat område eller områden som VideoSecurity kommer att övervaka för ändringar av förhållanden. Du konfigurerar egenskaperna för avläsning av region genom att klicka S e t d e t e c t r e g i o n ( S t ä l l i n l ä s a v r e g i o n ) från huvudmenyn i VideoSecurity. Följande dialogruta öppnas. Ställa in läs av region: 1.
2. Klicka S e t d e t e c t r e g i o n ( S t ä l l i n r e g i o n s a v l ä s n i n g ) från huvudmenyn i VideoSecurity för att visa dialogrutan för Forma egenskaper. 3. Klicka på alternativknappen för att välja regionstyp. 4. Klicka på alternativknappar för att välja formtyp. 5. Klicka på alternativknapparna för att välja ritningsläget. 6. Klicka O K för att tillämpa inställningar.
7. Klicka och dra musen på ett område för att ställa in regionsavläsning. Läs av region Du kan ställa in max tio (10) regionsavläsningar. 8. 52 Klicka för att påbörja övervakning.
Historik Innehåller listan av inspelade förhållanden i den avlästa regionen. Följande betecknar historiksektionen från huvudmenyn. Klicka för att välja tidigare inspelade förhållanden Klicka för att radera alla historikfiler Klicka för att se bild eller video Klicka för att radera förhållande 1. För att välja andra inspelade förhållanden klickar du på listrutan som är betecknad med datum och tid för inspelning. 2.
54 ASUS grafikkort