Computer Hardware User Manual
5-6 Chapter 5: RAID conguration
4. Select all the drives required for the RAID set, then press <Enter>.
The congurable array appears on screen.
3. The
ARRAY SELECTION MENU
displays the available drives connected to
the SATA ports. Select the drives you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from
READY
to
ONLIN A[X]-[Y]
, where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.