Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
4-18 Chapter 4: BIOS setup
PCIe Link Speed [Auto]
Allows you to set the PCIe link speed. When set to [Auto], the PCIe device runs
at the speed depending on the capability of the PCI Express port of MCH. When
set to [PCIe Gen1], the target link speed will be forced to meet the PCIe Gen1
specication. Conguration options: [Auto] [PCIe Gen1]
PCIE1 Slot Payload Size [Auto]
Allows you to set the maximum TLP payload size for the PCI Express port.
Conguration options: [Auto] [128B] [256B]
PCIE3 Slot Payload Size [Auto]
Allows you to set the maximum TLP payload size for the PCI Express port.
Conguration options: [Auto] [128B] [256B]
Inel VT-d Conguration
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Intel VT-d [Disabled]
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Intel VT-d function en
Intel VT-d [Disabled]
Allows you to enable or disable Intel VT-d function.
Conguration options: [Disabled] [Enabled]