user manual

ASUS MEW-L User’s Manual 37

3. HARDWARE SETUP

Connectors

3. H/W SETUP

16) Internal Audio Connectors (4-pin VIDEO, AUX, CD, TAD)

These connectors allow you to receive stereo audio input from such sound sources

as a CD-ROM, TV tuner, or MPEG card. The TAD connector allows the on-

board audio to interface with a voice modem card with a similar connector. It

also allows the sharing of mono_in (such as a phone) and mono_out (such as a

speaker) between the onboard audio and the voice modem card.

MEW-L Internal Audio Connectors

TAD In/Out

Modem-Out (from Modem)

Ground

Modem-In (to Modem)

CD In (Black)

Right Audio Channel

Left Audio Channel

Ground

AUX In (White)

Right Audio Channel

Left Audio Channel

Ground

VIDEO In (Green)

Right Audio Channel

Left Audio Channel

Ground

0 10 10 1

MEW-L

17) Internal Speaker Connector (SPKEAR)

This connector allows you to connect the internal chassis speaker to the onboard

audio’s output. This will allow you to use the chassis’ built-in speaker to listen to

sounds normally requiring separately purchased external speakers. The ground

(GND) wire is usually the black wire and the speaker-out (SPKOUT) is usually

the red wire. System beeps and warnings sent through the chassis speaker con-

nector is also routed through this internal speaker connector so that there is no

need for two speakers.

MEW-L Internal Speaker Connector

SPKEAR

0 10 10 1

MEW-L

SPKOUT

GND