User Manual

PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
43
PCH Core Voltage
Allows you to configure the voltage for the PCH Core. The values range from 0.700V
to 1.000V with an interval of 0.010V.
Configuration options: [Auto] [0.70000] - [1.00000]
Ring Down Bin
Allows you to enable or disable the Ring Downbin feature. This option is defaulted to
[Enabled]. Uses OC mailbox command 0x19.
[Auto] Set to default.
[Disabled] CPU will not down bin the ring ratio and the requested ring ratio limit will
be observed.
[Enabled] CPU will down bin the ring ratio, which means the requested max ring ratio
may not be observed.
Please use caution when disabling this feature as it may result in overvoltaging of the
CPU.
Min. CPU Cache Ratio
Allows you to set the minimum possible CPU cache ratio. Use the <+> and <-> keys to
adjust the value.
Configuration options: [Auto] [8] - [85]
Max. CPU Cache Ratio
Allows you to set the maximum possible CPU cache ratio. Use the <+> and <-> keys to
adjust the value.
Configuration options: [Auto] [8] - [85]
Max. CPU Graphics Ratio
Allows you to configure the CPU graphics ratio. The ratio may vary depending on the system
loading. Use the <+> and <-> keys to adjust the value.
Configuration options: [Auto] [1] - [42]
Extreme Over-voltage
This item can only be enabled when the onboard CPU_OV jumper is switched on. Setting
this item to [Enabled] allows you to configure higher voltages for overclocking, but the CPU
lifetime will not be guaranteed.
Configuration options: [Disabled] [Enabled]
Actual VRM Core Voltage
Allows you to configure the VRM output rail for Core Voltage. Manual mode allows users-
defined values. Offset mode modifies the values by SVID.
Configuration options: [Auto] [Manual Mode] [Offset Mode]