E7495 Notebook PC User Guide for Windows® 8 e7495_Win8_User_Guide.
Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Limitation of Liability Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS.
Contents About this user guide........................................................................................ 5 Icons ............................................................................................................... 5 Messages.............................................................................................................. 5 Typography..........................................................................................................
About this user guide This user guide provides an overview of using Windows® 8 plus the exclusive ASUS software applications included with your Notebook PC. As you read along, you will find certain icons, messages, and typography used as follows: Icons The icons below indicate which device can be used for completing a series of tasks or procedures on your Notebook PC. = Use the touchpad. = Use the keyboard.
Before upgrading to Windows® 8 To facilitate a smoother transition from your previous operating system, read the system requirements below before upgrading to Windows® 8: Processor 1GHz or faster RAM 1GB (32-bit) or 2 GB (64-bit) Hard disk space 16 GB (32-bit) or 20 GB (64-bit) Graphics card Microsoft DirectX9 graphics device with WDDM driver Screen resolution 1024 x 768 for Windows® apps 1366 x 768 for Snap feature NOTE: For updates on these system requirements, visit http:// www.windows.
Using Windows® 8 for the first time After completing the installation process, Windows® 8 directs you to a series of steps where you can customize your account settings and set user preferences for your Notebook PC. The setup process consists of the following: Step 1: Pick the language Step 2: License Agreement Step 3: Personalize Step 4: Wireless NOTE: This step allows you to connect to the internet during the setup process.
Starting up Windows® 8 To access Windows® 8 from Shut Down, Sleep, or Hibernate mode, refer to the following steps: 1. Press the power button on your Notebook PC . 2. The Windows® 8 lock screen appears after the Notebook PC boots up. Click on the touchpad or press any key on the keyboard to proceed. 3. Sign in using your local account or Microsoft account. 4. The Start screen appears next, indicating that you have successfully signed in to Windows® 8.
Windows® UI Windows® 8 comes with a tile-based user interface (UI) which allows you to organize and easily access Windows® apps from the Start Screen. It also includes the following features that you can use while working on your Notebook PC. Start screen The Start screen appears after successfully signing in to your user account. It helps organize all the programs and applications you need in just one place.
Hotspots Onscreen hotspots allow you to launch programs and access the settings of your Notebook PC. The functions in these hotspots can be activated using the touchpad. Hotspots on a launched app Hotspot upper left corner Action (1) Hover your mouse pointer then click on the recent app’s thumbnail to revert back to that app. (2) If you launched more than one app, slide down to show all launched apps.
Hotspots on the Start screen Hotspot upper left corner Action (1) Hover your mouse pointer then click on the recent app’s thumbnail to revert back to that app. (2) If you launched more than one app, slide down to show all launched apps. lower left corner Hover your mouse pointer then click on the recent app’s thumbnail to revert back to that app. upper and lower right corner Hover your mouse pointer to launch the Charm bar. 11 e7495_Win8_User_Guide.
Working with Windows® apps Use your Notebook PC’s touchpad or keyboard to launch and customize your apps. Launching apps Position your mouse pointer over the app then left-click or tap once to launch it. Press tab twice then use the arrow keys to browse through the apps. Press enter to launch the app you chose. Closing apps 1. Move your mouse pointer on the top side of the launched app then wait for the pointer to change to a hand icon. 2. Drag then drop the app to the bottom of the screen to close it.
Accessing All Apps Aside from the apps already pinned on your Start screen, you can also open other applications like the exclusive ASUS Software apps bundled with your Notebook PC through the All Apps screen. Horizontal scroll bar Launching the All Apps screen Right-click on the Start screen then click the All Apps icon. From the Start screen, press Windows key + Z. The All Apps icon is automatically selected so just press enter. 13 e7495_Win8_User_Guide.
Adding more apps on the Start screen 1. Position the mouse pointer over the app you want to add on the Start screen. 2. Right-click on the app to activate its settings. 3. Click on the icon. 14 e7495_Win8_User_Guide.
Charm bar The Charm bar is a toolbar that can be triggered on the right side of your screen. It consists of several tools that allow you to share applications and provide quick access for customizing the settings of your Notebook PC. Charm Bar Launching the Charm bar NOTE: When called out, the Charm bar initially appears as a set of white icons. The image above shows how the Charm bar looks like once activated. Use your Notebook PC’s touchpad or keyboard to launch the Charm bar.
Inside the Charm bar Search This tool allows you to look for files, applications, or programs in your Notebook PC. Share This tool allows you to share applications via social networking sites or email. Start This tool reverts the display back to the Start screen. From the Start screen, you can also use this to revert back to a recently opened app. Devices This tool allows you to access and share files with the devices attached to your Notebook PC such as an external display or printer.
Snap feature Using the Snap feature allows you to run two applications simultaneously on your Notebook PC. Once activated, the Snap bar appears to divide your display into two. IMPORTANT! A screen resolution of at least 1366 x 768 pixels is required to use the Snap feature. Snap bar Activating Snap Use your Notebook PC’s touchpad or keyboard to activate Snap onscreen. 1. Click on an app to launch it. 2. Hover the mouse pointer on the top side of your screen. 3.
Wi-Fi connection Access emails, surf the Internet, and share applications via social networking sites using your Notebook PC’s Wi-Fi connection. IMPORTANT! The Airplane mode should be turned off to enable this function. Disabling Airplane mode Use your Notebook PC’s touchpad or keyboard to disable this mode. 1. Launch the Charm bar. 2. Click Settings then click on the 3. Slide the settings bar to the left to turn this mode off. icon. Press fn + f2.
3. Select an access point from the list of available Wi-Fi connections. 4. The access point you chose gets activated as below. Click Connect to start the network connection. NOTE: You may be prompted to enter a security key to activate the Wi-Fi connection. 19 e7495_Win8_User_Guide.
Function keys The function keys on your Notebook PC’s keyboard can trigger the following commands: fn + f1 puts the Notebook PC into Sleep mode fn + f2 turns Airplane mode on or off NOTE: When enabled, the Airplane mode disables all wireless connectivity.
Function keys for ASUS Apps Your Notebook PC also comes with a special set of function keys that can be used to launch ASUS apps. fn + C toggles the ASUS Splendid Video Enhancement Technology app to switch between these display color enhancement modes: Gamma Correction, Vivid Mode, Theater Mode, Soft Mode, My Profile, and Normal.
Featured ASUS Apps LifeFrame Enhance your webcam functions through the LifeFrame app. Create snapshots, edit photos, record videos, record audio files, use your webcam as a security monitoring device, and play games using this app. NOTE: Some Notebook PC models might require you to enable the camera before using LifeFrame. To launch LifeFrame Press fn + V Archive toolbar Action button Modes Review bar Face Tracker Capture Zoom in/out Function settings 22 e7495_Win8_User_Guide.
LifeFrame functions Camera Use this function to take pictures using your webcam. Camcorder Use this function to take videos through your webcam. Monitor This function lets you use your webcam as a security video monitor as it automatically detects movement then captures it on photo. Voice Recorder Use this function to record audio files in your Notebook PC. Game This function lets you play games using the webcam. 23 e7495_Win8_User_Guide.
Power4Gear Hybrid Optimize the performance of your Notebook PC using the power saving modes in Power4Gear. NOTE: Unplugging the Notebook PC from its power adapter automatically switches Power4Gear Hybrid to Battery Saving mode. To launch Power4Gear Hybrid Press fn + spacebar Select from these power plan modes. Settings Allows you to enable/disable the desktop icons and the presentation mode. 24 e7495_Win8_User_Guide.
Performance mode Use this mode when doing high-performance activities like playing games or conducting business presentations using your Notebook PC. To customize, click the Performance icon inside the Power4Gear Hybrid window then click on Settings. Battery Saving mode This mode extends your Notebook PC’s battery life while plugged in to the power adapter or while running on battery power only. To customize, click the Battery Saving icon inside the Power4Gear Hybrid window then click on Settings.
USB Charger+ USB Charger+ allows you to quick charge mobile devices via your ASUS Notebook PC’s USB charge port. This feature can also be used even while your Notebook PC is on sleep, hibernate, or shutdown mode (on selected models). NOTE: USB Charger+ is available in your USB 3.0 charge port with the icon. WARNING: If your connected device overheats, remove it immediately.
3. Select one or both of these charging options: Enable quick charge when the system is running or Enable quick charge when the system is in sleep/hibernate/shutdown mode. NOTE: On some models, the USB Charger+ automatically selects both options. You can deselect these two options, if necessary. 4. Move the percentage slider to the left or to the right to set the limit for charging devices. 5. Click OK to save the settings made. Otherwise, click Cancel. 27 e7495_Win8_User_Guide.
Instant On Save battery power while your Notebook PC is on deep sleep mode (Deep S3) using Instant On. NOTE: Deep S3 is a technology that lets you save more battery power while your ASUS Notebook PC is on sleep mode. IMPORTANT! The standby time varies according to your Notebook PC's remaining battery capacity, computer model, configuration, and operating conditions. Performance mode This mode is default-enabled in your Notebook PC.
Remove everything and reinstall Windows Restoring your Notebook PC to its original factory settings can be done using the Remove everything and reinstall option in PC Settings. Refer to the steps below to enable this option: IMPORTANT! Back up all your data before enabling this option. NOTE: This process may take a while to complete. 1. Launch the Charm bar. 2. Click Settings > Change PC Settings >General. 3. Scroll down to view the Remove everything and reinstall Windows option.
Shutting down your Notebook PC Shutting down your Notebook PC can be done on the Start screen or from the desktop. 1. Launch the Charm bar. 2. Click Settings > Power > Shutdown. To shut down from the desktop, press alt + f4 to launch the Shut Down window. Select Shut Down from the drop-down list then click OK. 30 e7495_Win8_User_Guide.
