User Guide

Chapter 2: Hardware setupChapter 2: Hardware setup

Chapter 2: Hardware setup

2-482-48

2-48

2.10.52.10.5

2.10.5

Floppy disk driveFloppy disk drive

Floppy disk drive

2. Carefully pull out the drive from

the chassis until you see the

cables connected to the drive.

To remove the floppy disk drive:

1. Remove the screw that secures

the drive to the chassis.

You need to remove the front panel assembly before you can remove

the floppy disk drive. Refer to section “2.5.1 Removing the front panel

assembly” for instructions.

3. Disconnect the floppy disk cable

and power cable from the drive

to completely release the drive.