Installation & Assembly

ManualsBrandsAstoria Grand ManualsOutdoor DecorBagley Fiberglass Resin Fountain

ASSEMBLY

1. Place the bottom tier onto the pedestal, twist to lock them together.

2. Place the electric submersible pump in the bottom tier and run the

power cord through the built-in pipe and out the bottom of the pedestal.

3. Place the column on the bottom tier, twist to lock them together.

4. Place the third tier on the column, twist to lock them together.

5. Run the built-in water tube from the topper through the second tier,

twist to lock the topper onto the second tier.

6. Run the water tube from Step 5 through the third tier, twist to lock the

top assembly to the third tier.

7. Connect the water tube to the pump and install the pump access cover.

8. Fill the bottom tier with enough water to fully submerge the pump.

NOTE:

Additional water will need to be added once the pump circulates

water into the upper tiers.

9. Plug the power cord into a properly grounded GFCI outlet.

OUTDOOR WATER FOUNTAIN

Read the assembly instructions carefully and follow the care instructions.

Keep these instructions for future reference.

Select a smooth, level surface to place the fountain.



NOTE:

The water tube is built into the fountain topper. Gently and carefully

uncoil the water tube from inside the topper. Take care when handling the

water tube; detaching the water tube from the fountain will damage the

fountain and void the product warranty.

Page 1 / 2

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

2-PERSON ASSEMBLY

RECOMMENDED

 

Fountain Topper 1

Second Tier 1

Third Tier 1

Column 1

Bottom Tier 1

Pedestal 1

Electric Submersible Pump 1

Pump Access Cover 1

Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.

Additional water will need to be added once the pump circulates water into the upper tiers.

Thank

you for choosing our product. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our

discretion

within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos

are used to determine the cause of defects and for future quality control.

If you have any questions, comments or concerns, feel free to contact us

Summary of content (2 pages)

PAGE 1
Thank you for choosing our product. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. If you have any questions, comments or concerns, feel free to contact us.
PAGE 2
IMPORTANT INFORMATION • For outdoor use only. • Some splashing is normal; adjust the flow rate on the pump if the water rate is too high. • Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor. • Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid heavily chlorinated water as it may damage the fountain or pump.