User's Manual

DRAFT 66 8003 002-11

To initialize thermostats with suite settings

Figure C23

In the configuration with only one door to the entire suite, the thermostats are

init ialized in a c hain. The princ iple is desc ribed in Figure C23; room A in the room

chain is master for room B, whic h is in turn master for room C etc. This

and this

section describe the example from Figure C21,i.e.threeroomsinachain.

To initializ e the thermostat in the first ro o m o f the suite

1. Choose Initialize in the left pane

of the Orion Service window.

2. Clic k the plus sign for t he applic able

door area (in this example 'Floor 1')

and mark the master room,inthis

example 1021.

Figure C24

3. At Suite settings:

-EntertheSuite room (slave

room); in this example 1022.

-MarktheShare occupancy

checkbox.

Figure C25

4. Clic k the Initialize button.

Note :

It is only t he master room

that is init ialized with suite set tings,

so steps 1-3 above are never

performed for the slave room.

Figure C26