Instructions for use Gas hob HG1666A - HG6CBE1C HG1666S - HG6CBE1C HG1776A - HG7BBE1C HG1776S - HG7BBE1C HG1986A - HG9CBE1C HG1986S - HG9CBE1C
EN Manual Pictograms used: Important information Tip EN 3 - EN 8
OPERATING INSTRUCTIONS Description 1 2 5 1. 2. 3. 4. 5. 6. 7.
OPERATING INSTRUCTIONS Ignition and adjustment Standard burner 1. zone indication 2 2. 0 position 3. high setting 4. low setting 3 Each burner is fully adjustable between high and low settings. 4 • Press the control knob and turn it anticlockwise. The burner will 1 ignite. control knob • Press the control knob fully for at least 3 seconds between high (3) and low (4) settings. The thermocouple safety pilot has been activated. Wok burner with double regulator 2 1. zone indicator 2.
MAINTENANCE Use Pans • Always ensure that the flames remain under the pan. A lot of energy is lost if flames burn around the pan. The handles may also become too hot. • Do not use pans with a base diameter smaller than 12 cm. Smaller error pans are not as stable. good Wok ring The wok ring for use with the wok burner supplied or obtainable as an accessory provides extra stability for woks with a round base.
MAINTENANCE Maintenance Regular maintenance after use prevents food residue from encrusting and creating persistent stains. Use a mild cleaning detergent to remove stains. Clean the control knobs, burners and pan supports first and then the drip tray or glass cover. This will prevent the drip tray or glass cover from becoming dirty again during cleaning. Attention! Burner parts should not be cleaned in the dishwasher.
FAULTS Fault table If your gas hob does not work properly it does not always mean that it is defect. Try to solve the problem yourself first by checking the points in the table below or check the ‘www.asko.com ’ website for more information. SYMPTOM POSSIBLE CAUSE SOLUTION There is a smell of gas near the appliance. The appliance connection is leaking. Turn off the main gas supply valve. Contact your installer. A burner does not ignite. Plug not in socket.
ENVIRONMENTAL CONSIDERATIONS Disposal of the appliance and packaging Sustainable materials have been used during manufacture of this appliance. The appliance packaging is recyclable. The following materials may have been used: • cardboard; • paper; • polyethylene film (PE); • CFC-free polystyrene (PS-rigid foam); • polypropylene tape (PP). Dispose of these materials in a responsible way and in accordance with government regulations.
EN 9
en (12-15) 540718 / VER 1 / 2015-09-29
