User Manual

EN 11

INSTALLATION

Installation

• Open the panel.

• Remove the grease filter.

• Connect the controls together as depicted.

•

• First remove the 6 screws (2 on the left, 2 on the right, 2 on the

front), followed by the frame.

• Use a saw to create a recess in the bottom side of the cupboard

(at a distance of at least 650 mm from a gas hob). Refer to the

measurement drawing for this.

• Attach the unit with the 10 screws provided (12a).

• Put the frame into position.

• Restore the plug connection of the controls.

• Put the grease filter into position and close the panel.

260

494-744-834