Installation Instructions D5536XXLFI

ManualsBrandsAsko ManualsDishwashers492566

Installation Instructions

FI Dishwasher

INTRODUCTION ......................................................................................................................... 2

WHAT YOU NEED ...................................................................................................................... 2

SAFETY INSTRUCTIONS ............................................................................................................ 3

BEFORE STARTING THE INSTALLATION .................................................................................. 3

XXL DISHWASHERS ................................................................................................................... 4

– UNIT DIMENSIONS ............................................................................................................... 4

– PREPARING THE LOCATION ................................................................................................ 4

ADA AND XL DISHWASHERS .................................................................................................... 5

– UNIT DIMENSIONS ............................................................................................................... 5

– PREPARING THE LOCATION ................................................................................................ 5

– ADAFI TRIM KIT INSTALLATION OPTIONS .......................................................................... 6

STEP 1. FITTING THE DISHWASHER IN PLACE........................................................................ 7

STEP 2. ATTACHING THE ACCESSORY DOOR OR CUSTOM PANEL .................................... 10

STEP 3. ADJUSTING THE DOOR SPRINGS ............................................................................ 11

STEP 4. CONNECTING ELECTRICITY, WATER, AND DRAIN .................................................. 13

STEP 5. CHECKING DISHWASHER FUNCTION AND FIT ....................................................... 16

STEP 6. SECURING THE DISHWASHER.................................................................................. 16

STEP 7. ATTACHING THE TOE KICK (IF APPLICABLE) .......................................................... 18

INSTALLATION CHECKLIST ..................................................................................................... 20

CONTENTS

IMPORTANT!

READ ALL OF THESE INSTRUCTIONS BEFORE INSTALLING THE DISHWASHER.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

492181 Install DW16 FI USA EN Rev 01.indd 1 2015-01-13 11:13:47

Summary of content (20 pages)

PAGE 1
Installation Instructions FI Dishwasher CONTENTS INTRODUCTION.......................................................................................................................... 2 WHAT YOU NEED....................................................................................................................... 2 SAFETY INSTRUCTIONS............................................................................................................. 3 BEFORE STARTING THE INSTALLATION............................
PAGE 2
INTRODUCTION Read these instructions carefully and completely before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical and plumbing connections. NOTE: Cosmetic damage must be reported to the ASKO dealer within five days from the date of purchase. As soon as you unpack the dishwasher, thoroughly check it for cosmetic damage. WHAT YOU NEED TOOLS 1) Phillips No.
PAGE 3
SAFETY INSTRUCTIONS • It is important that you closely follow the instructions provided here. • The power outlet for the dishwasher should be installed in a location that is easily accessible once the dishwasher is installed. • An incorrect or defective installation can lead to higher consumption of energy, water and dishwashing detergent, which can lead to higher costs and poor cleaning results. • Always follow the applicable regulations for water, drain and electrical connection.
PAGE 4
XXL DISHWASHERS UNIT DIMENSIONS Technical Data U.S. Metric Height (Adjustable) 33-7/8˝ to 35-7/8˝ 860 mm to 912 mm Width 23-5/8˝ 600 mm Depth (Includes high loop) 22-7/8˝ 581 mm Depth W/Door Open 49-1/2˝ Weight 110 Ib Electricity 120V, 60Hz, 15 amp Water pressure 4.2 - 140 psi, 0.03-1.0 MPa, 0.
PAGE 5
ADA AND XL DISHWASHERS UNIT DIMENSIONS Technical Data U.S. Metric Height (Adjustable)* 32-3/8˝ to 34-1/4˝ 820 mm to 872 mm Width 23-5/8˝ 600 mm Depth (Includes high loop) 22-7/8˝ 581 mm Depth W/Door Open 48-3/8˝ Weight 108 Ib 23-5/8" 600 mm Electricity 120V, 60Hz, 15 amp Water pressure 4.2 - 140 psi, 0.03-1.0 MPa, 0.
PAGE 6
ADAFI TRIM KIT INSTALLATION OPTIONS ASKO XLADAFI dishwashers can be installed either with or without accessory fill strips depending on the type of installation. If the dishwasher cutout has been cut to European widths of 23-5/8˝ (600 mm), the unit won’t require fill strips. If the dishwasher cutout is a standard 24˝ (610 mm) wide, we have fill strips that make the unit 24˝ (610 mm) wide.
PAGE 7
STEP 1. FITTING THE DISHWASHER IN PLACE 1. Be sure to remove the transport protection for the door when unpacking the dishwasher. 2. Attach the light shielding film (packed in the document bag) to the underside of the countertop above the touch buttons. (Only certain models). ! 2x 1 The light shielding film ensures optimal button functionality. NOTE: The surface on which the protective film is to be attached must be clean and dry. 3. Attach the supplied door sealing 1 (only certain models).
PAGE 8
STEP 1. FITTING THE DISHWASHER IN PLACE 6. Adjust the front feet by turning them clockwise to raise or counterclockwise to lower the dishwasher. Leave enough space to adjust them later. 1˝ (24 mm) 7. Screw in the back foot completely by turning the adjustment screw at the front counterclockwise. Use a flat-bladed screwdriver or a 1/4˝ nut driver. (Only models with front adjustable rear foot).
PAGE 9
STEP 1. FITTING THE DISHWASHER IN PLACE 11. Adjust the back foot by turning the adjustment screw at the front clockwise. (Only models with front adjustable rear foot.) If the machine does not have a front adjustable rear foot, level the remaining rear legs just as you did the front legs. 12. Place the spirit level on the dishwasher door to check that the machine is level and adjust if necessary.
PAGE 10
* 1 * 2 STEP 2. ATTACHING THE ACCESSORY DOOR OR CUSTOM PANEL Follow the separate instructions supplied with the dishwasher to attach the chosen accessory door or custom panel to the front of the machine. NOTE: Once you have fitted the accessory door or custom panel to the dishwasher, the door springs may need adjusting. Check that the door stays in the position in which it is placed. If the door drops down when you open it, the springs need to be tightened.
PAGE 11
STEP 3. ADJUSTING THE DOOR SPRINGS TYPE A TYPE B (SEE PAGE 12) XL = 3-11 kg XXL = 1-9 kg Check that the door is balanced. It should not fall open or snap shut. Adjust as necessary. TYPE A The door springs are on the sides of the dishwasher. If necessary, pull out the dishwasher and adjust the tension of the door springs. A good idea is to try adjusting one side only first. 1. Be sure the door is closed. 2.
PAGE 12
STEP 3. ADJUSTING THE DOOR SPRINGS 5. Replace the back end of the spring by holding the spring at a right angle to the side of the dishwasher and pushing the end of the spring into the hole, then turning the spring in towards the dishwasher. 6. Reattach the front end of the spring by pulling it up and forward to fasten it in the mount. 6 7. Open the door and check the spring tension again. If necessary, make further adjustments as above.
PAGE 13
STEP 4. CONNECTING ELECTRICITY, WATER, AND DRAIN 1. CONNECT DRAIN HOSE ASKO provides a 7/8˝ (22 mm) diameter corrugated drain hose which is connected to the back of the unit to form a high loop. THREE WAYS TO INSTALL DRAIN CONNECTIONS A) Typical connection to sink plumbing before trap (high loop drain) NOTE: Do not use any fittings anywhere in the drain line that are less than 7/8˝ (22 mm) OD. The access hole for the drain line should be 1-5/8˝ (41 mm)- 2˝ (50mm) max.
PAGE 14
STEP 4. CONNECTING ELECTRICITY, WATER, AND DRAIN 2. CONNECT WATER SUPPLY HOSE WARNING! Plumbing connections must comply with applicable sanitary, safety and plumbing codes in your area. Shutoff valve The machine can be connected to either a hot (max. 160 °F, 70 °C) or cold water supply. We recommend a cold water supply. The water pressure should be 4.2-140 psi. Grounded outlet Connect to cold water... If you use oil or electricity to heat your home.
PAGE 15
STEP 4. CONNECTING ELECTRICITY, WATER, AND DRAIN Plug 3. CONNECT THE PLUG Ensure that the power outlet is within the range of the power cable. Do not use an extension cord! The dishwasher must be connected to a grounded outlet. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
PAGE 16
STEP 5. CHECKING DISHWASHER FUNCTION AND FIT Test the dishwasher with the Rinse & Hold program. Check that the dishwasher fills and drains properly. Also check that none of the connections leak. Also check that adjacent drawers and cabinet doors can be opened when the dishwasher door is open. STEP 6. SECURING THE DISHWASHER 1. Pull out the upper basket, and the center basket if present, and turn the basket stop on the runner outward. 2.
PAGE 17
STEP 6. SECURING THE DISHWASHER 5. Check that the dishwasher’s steel feet are solidly placed on the floor. Make sure the dishwasher is not hanging in the air by the mounting tabs. If it is, turn the front feet to lower them until the machine is resting on the feet. 6. Also adjust the dishwasher’s steel feet so that the dishwasher is level. 7. Tighten the lock nuts on the steel feet with a 5/8 inch (16 mm) open-ended wrench. 5/8" (16 mm) CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.
PAGE 18
STEP 7. ATTACHING THE TOE KICK (IF APPLICABLE) * * 1. 7 7 8 Insulation material 8 4. 5. x x 6. 2. 3. 18 CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.
PAGE 19
NOTES CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.
PAGE 20
INSTALLATION CHECKLIST ASKO - DISHWASHER Appliance Installation Checklist • Remove packaging and check for cosmetic damages. • Remove the information packets from inside the dishwasher. • Attach any accessories as required by the installation. Fill strips, light shielding film, supplied door sealing, accessory door, custom panel... • Attach the drain line using the largest section of the disposer boot allowable. Leave the high loop in place. • Attach the PEX fill hose. Don’t forget to use the O-ring.