User Manual
Table Of Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Installing the Wireless LAN Card
- Chapter 3 Wireless LAN Monitor Utility
- Chapter 4 Using Wireless Tray Icon Functions
- Chapter 5 Windows XP Wireless Zero Configuration Utility
- Chapter 6 Disabling / Uninstalling the Wireless LAN Card
- Chapter 7 Updating the Device Driver and Software
- Chapter 8 Troubleshooting
- Appendix A Limited Warranty
- Appendix B Regulatory Compliance
- Appendix C Setting Up TCP/IP
- Appendix D Specifications
- Glossary
Chapter 3 Wireless LAN Monitor Utility
31
Screen Item Description
Channel Select the channel (1 ~ 11) for your wireless network (Ad-Hoc mode
ONLY).
If you are using Infrastructure mode, your Wireless LAN Card will
automatically use the channel specified by the AP. You don’t need to
set up this item.
Power Saving Specifies the power save mode to be used in order to extend the
battery life of your notebook.
!
Disabled – The wireless adapter receives full power from the
PC. The Power Save function is disabled.
!
Normal – The driver turns off power to the wireless adapter for
short periods over briefly short time intervals.
!
Maximum – The driver turns off power to the wireless adapter
for longer periods over more long spaced time intervals.
Encryption
Encryption technology is used to enhance wireless media security. Your encryption settings
must match those used by the Access Points or wireless stations (Ad-hoc mode) in your
network, or your computer will be unable to communicate with others through the network.