Submittal Sheet

3/2
SERIES
HOV13B
4
COMBUSTION
397
Specifications
Opening Time: 9 seconds max.
Closing Time: 1 second max.
Note: Opening time is double between -30ºF and -40ºF ambient.
Opening time increases 20% when operating at 50Hz.
Ambient Temperature: -40ºF to 150ºF (-40ºC to 66ºC)
Fluid Temperature: 267˚ max. (131˚C)
Body/Trim: Bronze, 300# screw
Seal Material: PTFE
Port Size: 13/32"
Enclosure
Standard: General Purpose Type 1
Optional: Watertight Type 4
(Also meets General Purpose Type 1 and Raintight Type 3)
Electrical
Standard voltages: 120V/60Hz (or 110V/50Hz)
Non-standard voltages: 24V/60Hz; 240V/60Hz (or 220V/50Hz)
Proof of Closure Switch (POC): (standard)
A factory set, non-field adjustable SPDT switch. 1800VA max. connected
load (e.g. one 15A max. load @ 24V or 120V; one 7.5A max. load at 240V).
Auxiliary Switch: (optional)
One integral SPDT switch; field adjustable to actuate at any position
of stroke. 1800 VA max. connected load
(e.g. one 15A max. load @ 24V or 120V; one 7.5A max. load at 240V).
To order, change last digit of part number from “0” to “1”.
(e.g. assembly, HOV13B162T171; e.g. actuator, HO1B252A171)
General Description
The HOV13(B) is a push-type, bronze bodied safety valve,
electrohydraulically operated to provide reliable ON-OFF
control of fuel oil. The spring-loaded stem-guided PTFE seat
opens within nine seconds of power application and firmly
closes within one second of power interruption.
The valve is agency approved for fuel oil safety shutoff service
on the N.C. port. The N.O. port typically provides return to the
oil preheater during the off cycle.
The electrohydraulic actuator can be purchased separately,
and consists of a pump applying pressure to a piston pushing
the valve stem. Its power unit is immersed in oil and sealed.
The HOV13(B) assembly, which consists of an actuator and the
valve body mounted together by users, requires no adjust-
ment or service. Stroke is controlled by a travel limit switch
and electromagnetic relief valve. The unit rotates 360º for
ease of installation. Two-wire connection via 1/2 inch threaded
conduit terminal box is standard.
The HOV13(B) comes standard with valve seal overtravel
and electrical interlock proof of closure switch. An optional
auxiliary switch is also available.
Hydromotor Operated
3-Way Oil Shutoff Valve
Proof of Closure
1/2" and 3/4" NPT
^ # %
Fluid
No. 2 Fuel Oil at 60 SSU No. 5 Fuel Oil at 5000 SSU
No. 4 Fuel Oil at 300 SSU No. 6 Fuel Oil at 5000 SSU (Heated)
Electrical Characteristics
*Current increases by 20% for 50 Hz operation.
Installation
HO(B) actuator mounts in any position directly to a
V13 valve body with 3 set screws.
Approvals
UL listed to standard 429 “Electrically Operated
Valves”, Guide YIOZ, File MP932
FM Approved to Class 7400 “Liquid and Gas Safety
Shutoff Valves”
CSA Certified to “Electrically Operated Valves”, CSA
Std C22.2 No. 139, File 109157
Ordering Information
Important: HOV13(B) can be purchased as an assembly,
which includes the actuator & valve packaged in one
box, or seperately as HO(B) actuator & V13 valve body.
(e.g. assembly, HOV13B162T170)
(e.g. actuator, H01B252A170)
(e.g. valve body, V13FS2D03T166)
Voltage/Hz*
Amperes
Inrush Opening Holding
24V/60 28 8.2 0.49
120V/60, 110/50 5.6 2.1 0.09
240V/60, 220/50 2.8 1.1 0.04