User's Manual

20
Programming
Default Setting
• Press and hold “9” to return the
phone to default setting.
(The display will show
“888888888888888888”.)
• Press PROGRAM key to confirm
the selection and press CLEAR
key to exit.
Additional Features
Call Recording
• External recording equipment can
be connected to the stereo jack on
the base unit for call recording.
Out of Range
• During phone mode, the POD
sounds an out-of-range tone
periodically and the signal icon
flashes when it is too far from the
base.
• User should move closer to the
base so the call will not be
terminated.
• When the POD is moved close
enough to the base, the out-of-
range tone will stop automatically.
Paging
• Press the PAGE button at the
base during Standby to locate the
POD.
• The POD will ring until any key is
pressed or stop after 30 seconds
if no keys are pressed.