Use and Care Manual
To re-use tape, wash strip
of tape under running water.
Let air dry.
It is ready to be re-used.
Store Alien Tape roll inside a plastic storage bag after every use.
• Do not use on painted surfaces or sheetrock as it will be
permanent. Removing the tape may cause damage or leave
residue.
• Tape will not work on nonstick surfaces.
• Make sure to apply enough tape in order to hold the object.
• Do not use on surfaces that are not even. Alien tape must
have full contact with the surface.
• Improper installation may cause damage to property.
Always read and follow all instructions prior to use.
Clean the surface prior to
application for best results.
Make sure the surface is flat,
dry and free of dirt and oil.
ALIEN TAPE
™
APPLICATION
INSTRUCTIONS
Measure and cut the tape to
desired size. Always cut one
strip at a time.
1
Peel o backing to expose
the double stick side.
3
IMPORTANT: Firmly press
against all areas for 15-30
seconds each to help adhere.
Simply remove tape by slowly
pulling it o.
5
• Tough, weatherproof design works indoors and outdoors.
• Great for hanging pictures & decorations, stopping furniture
& carpet from sliding, securing phones while driving and more
• Suitable surfaces: Wood, marble, leather, smooth and frosted
glass, smooth tile and plastic surfaces.
PREPARING THE SURFACE
CLEANING & STORAGE
IMPORTANT
APPLYING ALIEN TAPE
IF USING ON SHEETROCK AND PAINTED SURFACES, APPLICATION
WILL BE PERMANENT. REMOVING THE ALIEN TAPE MAY CAUSE
PAINT TO PEEL OR LEAVE RESIDUE.
TIP: TO HELP REMOVE THE TAPE FROM THE PAINTED WALL, SPRAY
WATER ON THE TAPE’S EDGES TO AVOID DAMAGE TO THE SURFACE.
ALIEN TAPE™ ITEM NO. 7087FE DISTRIBUTED BY EMSON
®
NEW YORK,
NY 10001, USA ©2019 EMSON
®
ALL RIGHTS RESERVED. MADE IN CHINA.
Place tape on the surface with
adhesive side down. Use plenty
of tape to cover the surface. Ex.:
Use all sides of picture frame, as
shown above. Firmly press against
all areas for 15 seconds each to
help adhere.
2
4